Read JBL ON BEAT MICRO (serv.man3) EMC - CB Certificate online
Issue Date:
2012-10-23
Page 16 of 50
Report Reference #
E204594-A37-CB-1
IEC 60950-1
Clause
Requirement + Test
Result - Remark
Verdict
TRF No. : IEC60950_1B
This report issued under the responsibility of UL
2.6
Provisions for earthing and bonding
N/A
2.6.1
Protective earthing
Class III equipment.
N/A
2.6.2
Functional earthing
N/A
2.6.3
Protective earthing and protective bonding
conductors
conductors
N/A
2.6.3.1
General
N/A
2.6.3.2
Size of protective earthing conductors
N/A
Rated current (A), cross-sectional area (mm²),
AWG ...................................................................... :
AWG ...................................................................... :
-
2.6.3.3
Size of protective bonding conductors
N/A
Rated current (A), cross-sectional area (mm²),
AWG ...................................................................... :
AWG ...................................................................... :
-
Protective current rating (A), cross-sectional area
(mm²), AWG........................................................... :
(mm²), AWG........................................................... :
-
2.6.3.4
Resistance of earthing conductors and their
terminations; resistance (ohm), voltage drop (V),
test current (A), duration (min) .............................. :
terminations; resistance (ohm), voltage drop (V),
test current (A), duration (min) .............................. :
N/A
2.6.3.5
Colour of insulation ................................................ :
N/A
2.6.4
Terminals
N/A
2.6.4.1
General
N/A
2.6.4.2
Protective earthing and bonding terminals
N/A
Rated current (A), type, nominal thread diameter
(mm) ...................................................................... :
(mm) ...................................................................... :
-
2.6.4.3
Separation of the protective earthing conductor
from protective bonding conductors
from protective bonding conductors
N/A
2.6.5
Integrity of protective earthing
N/A
2.6.5.1
Interconnection of equipment
N/A
2.6.5.2
Components in protective earthing conductors and
protective bonding conductors
protective bonding conductors
N/A
2.6.5.3
Disconnection of protective earth
N/A
2.6.5.4
Parts that can be removed by an operator
N/A
2.6.5.5
Parts removed during servicing
N/A
2.6.5.6
Corrosion resistance
N/A
2.6.5.7
Screws for protective bonding
N/A
2.6.5.8
Reliance on telecommunication network or cable
distribution system
distribution system
N/A
Click on the first or last page to see other ON BEAT MICRO (serv.man3) service manuals if exist.