Read JBL ON BEAT AIR (serv.man4) EMC - CB Certificate online
www.tuv.com
Page 6 of 6
Report No.: 11023927 002
TRF No. IEC60950_1B
Manufacturer’s Declaration per sub-clause 6.2.5 of IECEE 02:
The application for obtaining a CB Test Certificate
includes more than one factory location and a
declaration from the Manufacturer stating that the
sample(s) submitted for evaluation is (are)
representative of the products from each factory has
been provided ................................................................:
includes more than one factory location and a
declaration from the Manufacturer stating that the
sample(s) submitted for evaluation is (are)
representative of the products from each factory has
been provided ................................................................:
Yes
Not applicable
When differences exist; they shall be identified in the General product information section.
Name and address of factory (ies) .......................... : Dongguan Sunstrong Electric Machine
Company Ltd.
Sunstrong Industrial Park, Sicun Administration
Zone, Tangxia Town, Dongguan, Guangdong, P.R.
China.
China.
General product information:
Definition of variable:
Variable:
Range of variable:
Content:
x
12, 20 or 30
Indicate output voltage’s range, 12 represent for output
voltage from 12.0V – 18.0V; 20 represent for output
voltage from 18.1V – 30.0V; 30 represent for output
voltage from 30.1V – 48.0V;
voltage from 12.0V – 18.0V; 20 represent for output
voltage from 18.1V – 30.0V; 30 represent for output
voltage from 30.1V – 48.0V;
a
120 - 480
3 digits, indicate 10 times output voltage in Volt., the
minimum step is 0.1V. eg: 120=12.0V, 480=48.0V.
minimum step is 0.1V. eg: 120=12.0V, 480=48.0V.
b
010 - 360
3 digits, indicate 100 times output current in A, the
minimum step is 0.01A. eg: 010=0.1A, 360=3.6A.
minimum step is 0.01A. eg: 010=0.1A, 360=3.6A.
Notes: All models have the same circuit diagram, PCB layout except for transformer, output rating and
some component ratings (see below table for detail).
some component ratings (see below table for detail).
Description of change(s):
1. Added additional trademark
for model SSA-60W-x ab (for variables, see page 6 for details)
.
Change
Testing
Comments
1
N/A
No affect to safety, see only copy of marking plate on page 4
for details.
for details.
Other comments:
History of amendments and modifications:
Ref. No. 11023927 001, dated Jan. 20, 2010 (original test report)
Ref. No. 11023927 002, dated May. 3, 2011 (1
Ref. No. 11023927 002, dated May. 3, 2011 (1
st
Amendment)