Read JBL ON BEAT AIR (serv.man4) EMC - CB Certificate online
Test Report issued under the responsibility of:
TEST REPORT
IEC 60950-1
Information technology equipment – Safety –
Part 1: General requirements
Report Number. .............................. :
11023927 002
Date of issue..................................... :
May 03, 2011
Total number of pages ......................
6
CB Testing Laboratory................... : TÜV Rheinland (Shenzhen) Co., Ltd.
Address ............................................ : 34F Tower A World Finance Centre, Shennan East Road 4003,
Luohu District, 518001 Shenzhen, P.R. China
Applicant’s name ............................ : Sunstrong Industrial Ltd.
Address ............................................ : Flat 5-9, 10/F., Wing Hing Industrial Building No. 83-89, Chai Wan
Kok Street, Tsuen Wan, Hong Kong.
Manufacturer’s name……………….: Same as applicant
Address ............................................ : Same as applicant
Test specification:
Standard ........................................... : IEC 60950-1:2005 (2nd Edition); Am 1:2009
Test procedure ................................. : CB Scheme
Non-standard test method…………..: N/A
Test Report Form No...................... : IEC60950_1B
Test Report Form(s) Originator ........ : SGS Fimko Ltd
Master TRF....................................... : Dated 2010-04
This publication may be reproduced in whole or in part for non-commercial purposes as long as the IECEE is acknowledged as
copyright owner and source of the material. IECEE takes no responsibility for and will not assume liability for damages resulting
from the reader's interpretation of the reproduced material due to its placement and context.
copyright owner and source of the material. IECEE takes no responsibility for and will not assume liability for damages resulting
from the reader's interpretation of the reproduced material due to its placement and context.
If this Test Report Form is used by non-IECEE members, the IECEE/IEC logo and the reference to the CB
Scheme procedure shall be removed.
Scheme procedure shall be removed.
This report is not valid as a CB Test Report unless signed by an approved CB Testing Laboratory
and appended to a CB Test Certificate issued by an NCB in accordance with IECEE 02.
and appended to a CB Test Certificate issued by an NCB in accordance with IECEE 02.
Test item description .....................: POWER SUPPLY
Trade Mark ....................................... :
1)
2)
Manufacturer .................................... : Same as applicant
Model/Type reference....................... : SSA-60W-x ab (for variables, see page 6 for details)
Ratings ............................................. : Input: 100-240V~, 50/60 Hz, 1.5A
Output: see original CB report 11023927 001 page 7 for details
Click on the first or last page to see other ON BEAT AIR (serv.man4) service manuals if exist.