ON BEAT AIR (serv.man3) - JBL Audio EMC - CB Certificate (repair manual). Page 114

Read JBL ON BEAT AIR (serv.man3) EMC - CB Certificate online

ATTACHMENT
 
 
National Differences 
 
 
Page 113 of 116 
 
Report No.:  11023927 001 
National Differences 
Clause 
Requirement + Test 
Result – Remark 
Verdict 
 
 
JA.3 
ISOLATING SWITCH 
 
Document shredding machines shall incorporate 
an isolating switch complying with sub-clause 
3.4.2 as the device disconnecting the power of 
hazardous moving parts. For this switch, two-
position (single-use) switch or multi-position 
(multifunction) switch (e.g., slide switch) may be 
used.  
 
If two-position switch, the positions for  “ON” and 
“OFF” shall be indicated in accordance with sub-
clause 1.7.8. If multi-position switch, the position 
for “OFF” shall be indicated in accordance with 
sub-clause 1.7.8 and other positions shall be 
indicated with proper terms or symbols. 
 
Compliance is checked by inspection. 
Added. 
Product is DC Power Supply 
Unit, not Paper Shredder. 
N/A 
JA.4 
PROTECTION IN OPERATOR ACCESS AREAS 
 
Any warning shall not be used instead of the 
structure for preventing access to hazardous 
moving parts. 
Document shredding machines shall comply with 
the following requirements. 
 
Push the test finger, Figure JA.1, into all 
openings in MECHANICAL ENCLOSURES 
without applying additional force. It shall not be 
possible to touch hazardous moving parts with 
the test finger. The document shredding machine 
is installed as intended, and all face of 
MECHANICAL ENCLOSURES are subjected to 
this test. Before testing with the test finger, 
remove the parts detachable without a tool. 
 
Push the wedge-probe, Figure JA.2, into the 
document-slot. And, against all directions of 
openings, if straight-cutting type, a force of 45 N 
shall apply to the probe, and 90 N if cross-cutting 
type. In this case, the weight of the probe shall 
not influence the test. Before testing withy the 
test finger, remove the parts detachable without 
a tool. It shall not be possible to touch any 
hazardous moving parts, including the shredding 
roller or the mechanical section for shedding, 
with the probe. 
Added. 
Product is DC Power Supply 
Unit, not Paper Shredder. 
N/A 
Page of 123
Display

Click on the first or last page to see other ON BEAT AIR (serv.man3) service manuals if exist.