Read JBL ON AIR WIRELESS (serv.man2) EMC - CB Certificate online
ATTACHMENT
Report No: U1011006-610
National Differences
Page 10 of 12
National Differences
Clause
Requirement + Test
Result - Remark
Verdict
US National Differences
3.2.5
Power supply cords are required to be no longer
than 4.5 m in length and minimum length shall be
1.5 m. Flexible power supply cords are required to
be compatible with Article 400 of the NEC.
than 4.5 m in length and minimum length shall be
1.5 m. Flexible power supply cords are required to
be compatible with Article 400 of the NEC.
Class III equipment. Not directly
connected to the mains.
connected to the mains.
N/A
3.2.9
Permanently connected equipment must have a
suitable wiring compartment and wire bending
space.
suitable wiring compartment and wire bending
space.
Not such equipment.
N/A
3.3.3
Wire binding screws are not permitted to attach
conductors larger than 10 AWG (5.3 mm2).
conductors larger than 10 AWG (5.3 mm2).
No such consideration.
N/A
3.3.4
Terminals for permanent wiring, including
protective earthing terminals, must be suitable for
U.S wire gauge sizes, rated 125 percent of the
equipment rating, and be specially marked when
specified (1.7.7).
protective earthing terminals, must be suitable for
U.S wire gauge sizes, rated 125 percent of the
equipment rating, and be specially marked when
specified (1.7.7).
No such consideration.
N/A
3.4.2
Motor control devices are required for cord-
connected equipment with a motor if the
equipment is rated more than 12 A, or if the motor
has a nominal voltage rating greater than 120 V,
or is rated more than 1/3 hp (locked rotor current
over 43 A).
connected equipment with a motor if the
equipment is rated more than 12 A, or if the motor
has a nominal voltage rating greater than 120 V,
or is rated more than 1/3 hp (locked rotor current
over 43 A).
No such consideration.
N/A
3.4.8
Vertically-mounted disconnect switches and
circuit breakers are required to have the "on"
position indicated by the handle in the up position.
circuit breakers are required to have the "on"
position indicated by the handle in the up position.
No such consideration.
N/A
3.4.11
For computer room applications, equipment with
battery systems capable of supplying 750 VA for
five minutes are required to have a battery
disconnect means that may be connected to the
computer room remote power-off circuit.
battery systems capable of supplying 750 VA for
five minutes are required to have a battery
disconnect means that may be connected to the
computer room remote power-off circuit.
Not such equipment.
N/A
4.3.12
The maximum quantity of flammable liquid stored
in equipment is required to comply with NFPA 30.
in equipment is required to comply with NFPA 30.
No such consideration.
N/A
4.3.13.5
Equipment with lasers is required to meet the
Code of Federal Regulations 21 CFR 1040.
Code of Federal Regulations 21 CFR 1040.
No laser.
N/A
4.7
For computer room applications, automated
information storage systems with combustible
media greater than 0.76 m3 (27 cu ft) are
required to have a provision for connection of
either automatic sprinklers or a gaseous agent
extinguishing system with an extended discharge.
information storage systems with combustible
media greater than 0.76 m3 (27 cu ft) are
required to have a provision for connection of
either automatic sprinklers or a gaseous agent
extinguishing system with an extended discharge.
No such consideration.
N/A
4.7.3.1
For computer room applications, enclosures with
combustible material measuring greater than 0.9
m2 (10 sq ft) or a single dimension greater than
1.8 m (6 ft) are required to have a flame spread
rating of 50 or less. For other applications,
enclosures with the same dimensions require a
flame spread rating of 200 or less.
combustible material measuring greater than 0.9
m2 (10 sq ft) or a single dimension greater than
1.8 m (6 ft) are required to have a flame spread
rating of 50 or less. For other applications,
enclosures with the same dimensions require a
flame spread rating of 200 or less.
No such consideration.
N/A
Annex H
Equipment that produces ionizing radiation must
comply with Federal Regulations, 21 CFR 1020
comply with Federal Regulations, 21 CFR 1020
No CRT.
N/A
Click on the first or last page to see other ON AIR WIRELESS (serv.man2) service manuals if exist.