Read JBL JSR 625 (serv.man2) User Guide / Operation Manual online
4
MHz
FM
PRESET
MEM
Headphones
TV/VCR 2
Surround
Tape Mon
VCR1
FM
CD
Aux
AM
Bass
Treble
Balance
Tune/Preset
Tune/Preset
Memory
Seek Stereo
Volume
VCR 2
8
3
9
6
7
2
1
4
5
10
13 11
16
14 12
15
Surround Off
POWER BUTTON
Press this button to turn the power on. Press again to turn the
power off. If you connect the other components to the switched
outlet, it can also be used as a system power button.
power off. If you connect the other components to the switched
outlet, it can also be used as a system power button.
HEADPHONE JACK
Stereo headphones can be plugged into this jack for private listen-
ing. Headphone impedance should be between 8 and 2K ohms.
Best results between 200 and 400 ohms.
ing. Headphone impedance should be between 8 and 2K ohms.
Best results between 200 and 400 ohms.
BASS CONTROL
Modifies the low-frequency sound of the left and right channels as
much as ± 10dB. Set this control at a suitable position for your
taste and room acoustics.
much as ± 10dB. Set this control at a suitable position for your
taste and room acoustics.
TREBLE CONTROL
Modifies the high-frequency sound of the left and right channels as
much as ± 10dB. Set this control at a suitable position for your
taste and room acoustics.
much as ± 10dB. Set this control at a suitable position for your
taste and room acoustics.
BALANCE CONTROL
This control is used for balancing the relative sound volume of the
left and right channel speakers. Clockwise rotation reduces the vol-
ume from the left speaker, counterclockwise rotation reduces the
volume from the right speaker.
left and right channel speakers. Clockwise rotation reduces the vol-
ume from the left speaker, counterclockwise rotation reduces the
volume from the right speaker.
SURROUND MODE SELECTOR
Press this button to select the desired surround mode. The
mode is changed between normal DOLBY Pro Logic and
DOLBY 3-STEREO.
mode is changed between normal DOLBY Pro Logic and
DOLBY 3-STEREO.
SURROUND OFF
Defeats all surround modes.
INPUT FUNCTION SELECTOR BUTTONS
Press these buttons to select the desired input source.
TAPE MONITOR BUTTON
Press this button to select input from a tape deck.
VCR 2 INPUT JACKS
Connect these jacks to the corresponding output jacks of a VCR.
TUNE / PRESET BUTTONS
When PRESET and AUTO are not lit, the TUNE/PRESET buttons
will allow you to tune to a station manually.
will allow you to tune to a station manually.
11
10
9
8
7
6
5
4
3
2
1
JSR625 Owners Manual 7/28/98 10:53 AM Page 4
Click on the first or last page to see other JSR 625 (serv.man2) service manuals if exist.