Read JBL ESC 550 Source (serv.man16) User Guide / Operation Manual online
– 20 –
Rear Channel Volume
Surround
Calibrate
Surround
Calibrate
Surround
Calibrate
Push “Calibrate” on the remote
control until “Rear” appears in
the display and the
corresponding LED on top of
the display is lit.
control until “Rear” appears in
the display and the
corresponding LED on top of
the display is lit.
Push “+” on the remote control
to increase the volume
of the rear channels.
to increase the volume
of the rear channels.
Push “–” on the remote
control to decrease the
volume of the rear channels.
control to decrease the
volume of the rear channels.
Delay Time
The delay control allows the
user to set the surround delay
between 15 and 30 milli-
seconds in 1 millisecond
increments. The best setting will
depend on the distance between
the main listening area and the
user to set the surround delay
between 15 and 30 milli-
seconds in 1 millisecond
increments. The best setting will
depend on the distance between
the main listening area and the
front speakers as well as the
distance between the main
listening area and the rear
speakers.
The chart at the bottom shows
the recommended settings.
distance between the main
listening area and the rear
speakers.
The chart at the bottom shows
the recommended settings.
Surround
Calibrate
Surround
Calibrate
Surround
Calibrate
Push “Calibrate” on the remote
control until “Delay” appears in
the display and the
corresponding LED on top of
the display is lit.
control until “Delay” appears in
the display and the
corresponding LED on top of
the display is lit.
Push “+” on the remote
control to increase the
delay time.
control to increase the
delay time.
Push “–” on the remote
control to decrease the
delay time.
control to decrease the
delay time.
Click on the first or last page to see other ESC 550 Source (serv.man16) service manuals if exist.