Read JBL ESC 350 Source (serv.man2) Service Manual online
9
Dolby Pro-Logic
Ò
Surround Processor/CD Player/Tuner
SOURCE
LCD DISPLAY FLICKERS &
CD TRACKS ADVANCE BY
THEM SELVES
CD TRACKS ADVANCE BY
THEM SELVES
(1) On the MAIN PCB, add insulated
jumper from R901 (nearest C909)(+) to
R902 (nearest jumper J103).
jumper from R901 (nearest C909)(+) to
R902 (nearest jumper J103).
(2) Cut out R901 (1 ohm resistor)
DISPLAY STAYS ON WHEN
POWER OFF
POWER OFF
On the MAIN PCB, change R719 (10k
ohm resistor) to 1k ohm (QAF0650-102)
ohm resistor) to 1k ohm (QAF0650-102)
CD FUNCTION (PLAY,
TRACK UP) CHANGES TO
TV BY ITSELF
TRACK UP) CHANGES TO
TV BY ITSELF
On the MAIN PCB, short pins 60 & 61
on IC701 together by solder or jumper
wire.
on IC701 together by solder or jumper
wire.
GOES TO STANDBY MODE
BY ITSELF WHEN PLAYING
CD’s
BY ITSELF WHEN PLAYING
CD’s
(1) On the MAIN PCB, add insulated
jumper from R901 (nearest C909)(+) to
upper hole in PCB (near C912 and
nearest plastic rivet) PCB will have to
be removed and soldered at the rear.
jumper from R901 (nearest C909)(+) to
upper hole in PCB (near C912 and
nearest plastic rivet) PCB will have to
be removed and soldered at the rear.
(2) Cut copper trace joining JW100 and
CN804 at rear of PCB (see illustration)
CN804 at rear of PCB (see illustration)
Click on the first or last page to see other ESC 350 Source (serv.man2) service manuals if exist.