Read JBL ES 150PW (serv.man3) EMC - CB Certificate online
Report No：W-N-1002010-CY-01-1
Telecom Technology Center
38
6.8.6 Test Result
EUT:
Wireless Speaker Amplifier
Location:
EFT Room
Temperature:
21.4 ℃
Relative Humidity:
44 %RH
Pressure:
1022 mbar
Test Power:
230V AC, 50Hz
Test Mode:
Sound play Mode
Pulse :5/50ns
Burst :15m/300ms
Burst :15m/300ms
Repetition Rate: 2.5kHz
above 2.0kV, 5kHz below
and equal 2.0kV
above 2.0kV, 5kHz below
and equal 2.0kV
Test time: 1 min/each
condition
condition
0.5 kV
Voltage\Polarity\
\Test Point\Mode\Result
\Test Point\Mode\Result
＋
－
L
B
B
N B
B
Power Line
L – N
B
B
Pulse :5/50ns
Burst :15m/300ms
Burst :15m/300ms
Repetition Rate: 2.5kHz
above 2.0kV, 5kHz below
and equal 2.0kV
above 2.0kV, 5kHz below
and equal 2.0kV
Test time: 1 min/each
condition
condition
1 kV
Voltage\Polarity\
\Test Point\Mode\Result
\Test Point\Mode\Result
＋
－
L
B
B
N B
B
Power Line
L – N
B
B
Note: (1) P/N denotes the Positive/Negative polarity of the output voltage.
(2) N/A - denotes test is not applicable in this test report
(3) Criteria A: There was no change operated with initial operating during the
(3) Criteria A: There was no change operated with initial operating during the
test.
(4) Criteria B: The EUT function loss during the test, but self-recoverable after
the test.
(5) Criteria C: The system shut down during the test.
Click on the first or last page to see other ES 150PW (serv.man3) service manuals if exist.