ES 150PW (serv.man3) - JBL Audio EMC - CB Certificate (repair manual). Page 39

Report No：W-N-1002010-CY-01-1                                                                                                       

 

35 

 
Basic Standard:

 

IEC 61000-4-4

 

Test Voltage:

 

Power Line:1 kV, Coaxial Cable:0.5 kV

 

Impulse Wave shape :

 

5/50 ns

 

Burst Duration:

 

15 ms

 

Burst Period:

 

300 ms

 

Test Duration:

 

Not less than 1 min.

 

 

 
The EUT and support equipment, are placed on a table that is 0.8 meter above a metal 
ground plane measured 1m*1m min. and 0.65mm thick min. 
The other condition as following manner: 
a. The length of power cord between the coupling device and the EUT should not 

exceed 1 meter. 

b. Both positive and negative polarity discharges were applied. 
c. The duration time of each test sequential was 1 minute 
d. For the actual test configuration, please refer to the related Item –EUT Test Photos. 
 

 
No deviation