Read JBL ENCOUNTER (serv.man4) EMC - CB Certificate online
- Page 12 of 51 -
www.nemko.com
Report No. 27772
TRF No.:IECEN60950_1B
2
PROTECTION FROM HAZARDS
Class III equipment powered by
an SELV source.
an SELV source.
—
2.1
Protection from electric shock and energy hazards
—
2.1.1
Protection in operator access areas
Refer below:
—
2.1.1.1
Access to energized parts
Class III equipment powered by
an SELV source.
an SELV source.
N/A
Test by inspection ........................................... :
—
Test with test finger ......................................... :
—
Test with test pin ............................................. :
—
Test with test probe ......................................... :
—
2.1.1.2
Battery compartments ..................................... :
No batteries in unit.
N/A
2.1.1.3
Access to ELV wiring
Class III equipment powered by
an SELV source.
an SELV source.
N/A
Working voltage (V); minimum distance (mm)
through insulation
through insulation
N/A
2.1.1.4
Access to hazardous voltage circuit wiring
Class III equipment powered by
an SELV source.
an SELV source.
N/A
2.1.1.5
Energy hazards .............................................. :
Class III equipment powered by
an SELV source.
an SELV source.
N/A
2.1.1.6
Manual controls
No shafts of knobs etc. at ELV,
TNV or hazardous voltage.
TNV or hazardous voltage.
N/A
2.1.1.7
Discharge of capacitors in equipment
Class III equipment.
N/A
Time-constant (s); measured voltage (V)............ :
—
2.1.2
Protection in service access areas
Class III equipment powered by
an SELV source.
an SELV source.
N/A
2.1.3
Protection in restricted access locations
Equipment not intended for
installation in RAL.
installation in RAL.
N/A
Click on the first or last page to see other ENCOUNTER (serv.man4) service manuals if exist.