DSC 800 DVD-RDS - JBL Audio User Guide / Operation Manual. Page 7

Refer to the pages indicated in
parentheses for details.

 POWER (page 15). Turn on and off
the main power of the system. 
(Note: This switch must be “on” in
order to operate the system with the
remote control.)

 Disc Tray (page 18). Place a disc
on the tray.

  REV. While playing a disc
(page 19), press this button to select
the previous title, chapter or track.
While listening to the radio (page 35),
press this button to tune to a lower
frequency. 
For automatic tuning, press and hold
it for more than 1 second.

  FWD. While playing a disc
(page 19), press this button to select
the next title, chapter or track. While
listening to the radio (page 36), press
this button to tune to a higher
frequency. 
For automatic tuning, press and hold
it for more than 1 second.

 A STOP (page 18). Stop playing a
disc.

 G/B PLAY / PAUSE (page 18). Play
or pause a disc.

 REMOTE SENSOR. Receives the
remote control signals.

 Front Panel Display (page 6).
Indicate the playing time, etc.

 PHONES jack. Connect head-
phones to this jack. (Headphones not
included.)

 SELECT (page 40). Select an audio
channel to check or adjust its level.

 VOLUME + (page 16, 40). Increase
the master volume level or the
selected channel level.

 SOURCE (page 17, 18, 35, 36).
Select the component you want to
use. In standby mode, press this
button to turn on the power of this
system.

 VOLUME – (page 16, 40).
Decrease the master volume level or
the selected channel level.

 OPEN/CLOSE (page 18). Open or
close the disc tray.

 POWER LED (page 18). 
Power On:  LED lights Blue
Standby:     LED lights Red
Mute:          LED blinks Red