Read JBL CS 360Xcite (serv.man2) Service Manual online
9
9
WWW.JBL.COM
DISCRETE MATRIX CINEMA MUSIC
English
Remote and Front-Panel Controls and Indicators
Power ON (Remote and Front Panel)
On the Remote Control, the ON Button turns the unit ON,
while Button
while Button
2 turns the unit to STANDBY. On the Sub-
woofer Front Panel, the ON Button is a combined ON/OFF
Button that toggles between ON and STANDBY. The display
briefly shows PWR ON or PWROFF while this is happening.
Please note that the Xcite features Automatic Turn-On/
Off, and the power switch is not normally used unless it is
necessary to over ride this automatic feature. Please read
the details regarding Automatic Turn-On/Off on page 3 of
this manual.
Button that toggles between ON and STANDBY. The display
briefly shows PWR ON or PWROFF while this is happening.
Please note that the Xcite features Automatic Turn-On/
Off, and the power switch is not normally used unless it is
necessary to over ride this automatic feature. Please read
the details regarding Automatic Turn-On/Off on page 3 of
this manual.
When the Xcite is plugged into a working electrical outlet
and its master switch on the back panel is set to On, the
Standby light in the ON Button on the front panel will illu-
minate. The display window will light as soon as the Xcite
is turned on either automatically or via the pressing of the
ON Button on the Remote Control or Front Panel.
and its master switch on the back panel is set to On, the
Standby light in the ON Button on the front panel will illu-
minate. The display window will light as soon as the Xcite
is turned on either automatically or via the pressing of the
ON Button on the Remote Control or Front Panel.
1
Direct Input Selector Buttons (Remote Only)
Access each of the four Inputs on the rear panel with
the Buttons R1 to R4. Under normal day-to-day use, the
Automatic Source Selection System either uses the last
Input that you listened to, or switches to the appropriate
Source when you power it up. Only when this system does
not work, or if you wish to alternate between two or three
signal sources, do these buttons come in handy.
the Buttons R1 to R4. Under normal day-to-day use, the
Automatic Source Selection System either uses the last
Input that you listened to, or switches to the appropriate
Source when you power it up. Only when this system does
not work, or if you wish to alternate between two or three
signal sources, do these buttons come in handy.
2
OFF Button (Remote Only)
Switches the system off.
3
Menu Button (Remote Only)
See page 11 for an explanation of the Menu/Setup pro-
cedures.
cedures.
4
Set Button (Remote Only)
Use this Button to confirm your selection in the Menu/
Setup procedures.
Setup procedures.
5
Night (Remote Only)
This feature is available for Dolby Digital only. It com-
presses the inherently dynamic digital sound so that the
quiet and loud passages are not quite as different in sound
levels as they ordinarily are. This feature allows the user to
watch movies and listen to dialogue at toned-down levels
so as not to disturb others by the loud sound effects that
may be present. The word NIGHT lights up in the display
when this feature is active.
presses the inherently dynamic digital sound so that the
quiet and loud passages are not quite as different in sound
levels as they ordinarily are. This feature allows the user to
watch movies and listen to dialogue at toned-down levels
so as not to disturb others by the loud sound effects that
may be present. The word NIGHT lights up in the display
when this feature is active.
Front Panel
Remote Control
Click on the first or last page to see other CS 360Xcite (serv.man2) service manuals if exist.