Read JBL ATX 10C (serv.man3) User Guide / Operation Manual online
3
near these heat-dissipation systems may
possibly affect the long term reliability of
both your amplifier and the objects placed
above it.
Do not place CDs, record jackets, owner’s
manuals or other paper on top of or
beneath the unit or in between products
containing amplifiers in a stack. This will
block the air flow, causing degraded per-
formance and a possible fire hazard.
20. Power Sources. This product should be
operated only from the type of power
source indicated on the marking label. If
you are not sure of the type of power sup-
ply to your home, consult your product
dealer or local power company. For prod-
ucts intended to operate from battery
power, or other sources, refer to the oper-
ating instructions.
21. Grounding or Polarization. This product
may be equipped with a polarized alternat-
ing-current line plug (a plug having one
blade wider than the other). This plug will
fit into the power outlet only one way. This
is a safety feature. If you are unable to
insert the plug fully into the outlet, try
reversing the plug. If the plug should still
fail to fit, contact your electrician to
replace your obsolete outlet.
Do not defeat the safety purpose of the
polarized plug.
22. Power-Cord Protection. Power-supply
cords should be routed so that they are not
likely to be walked on or pinched by items
placed upon or against them, paying parti-
cular attention to cords at plugs, con-
venience receptacles, and the point where
they exit from the product. To avoid safety
hazards, use only the power cord supplied
with your unit. If a replacement cord is
used, make certain that it is of a similar
gauge. We do not recommend using exten-
sion cords with this product. As with all
electrical devices, do not run power cords
under rugs or carpets or place heavy
objects on power cords. Damaged power
cords should be replaced immediately, by a
qualified service technician, with cords
meeting factory specifications. When dis-
connecting the power cord from an AC
outlet, always pull the plug; never pull the
cord.
possibly affect the long term reliability of
both your amplifier and the objects placed
above it.
Do not place CDs, record jackets, owner’s
manuals or other paper on top of or
beneath the unit or in between products
containing amplifiers in a stack. This will
block the air flow, causing degraded per-
formance and a possible fire hazard.
20. Power Sources. This product should be
operated only from the type of power
source indicated on the marking label. If
you are not sure of the type of power sup-
ply to your home, consult your product
dealer or local power company. For prod-
ucts intended to operate from battery
power, or other sources, refer to the oper-
ating instructions.
21. Grounding or Polarization. This product
may be equipped with a polarized alternat-
ing-current line plug (a plug having one
blade wider than the other). This plug will
fit into the power outlet only one way. This
is a safety feature. If you are unable to
insert the plug fully into the outlet, try
reversing the plug. If the plug should still
fail to fit, contact your electrician to
replace your obsolete outlet.
Do not defeat the safety purpose of the
polarized plug.
22. Power-Cord Protection. Power-supply
cords should be routed so that they are not
likely to be walked on or pinched by items
placed upon or against them, paying parti-
cular attention to cords at plugs, con-
venience receptacles, and the point where
they exit from the product. To avoid safety
hazards, use only the power cord supplied
with your unit. If a replacement cord is
used, make certain that it is of a similar
gauge. We do not recommend using exten-
sion cords with this product. As with all
electrical devices, do not run power cords
under rugs or carpets or place heavy
objects on power cords. Damaged power
cords should be replaced immediately, by a
qualified service technician, with cords
meeting factory specifications. When dis-
connecting the power cord from an AC
outlet, always pull the plug; never pull the
cord.
23. Non-use Periods. The power cord of
the product should be unplugged from the
outlet when left unused for long periods of
time.
24. Lightning. For added protection for this
product during a lightning storm, or when it
is left unattended and unused for long peri-
ods of time, unplug it from the wall outlet
and disconnect the antenna or cable sys-
tem. This will prevent damage to the prod-
uct due to lightning and power-line surges.
25. Overloading. Do not overload wall out-
lets, extension cords, or integral conven-
ience receptacles, as this can result in a
risk of fire or electric shock.
26. Damage Requiring Service. Do not
attempt to service this product yourself, as
opening or removing covers may expose
you to dangerous voltage or other hazards.
Unplug this product from the wall outlet
and refer servicing to qualified service per-
sonnel under the following conditions:
a. The power-supply cord or the plug has
the product should be unplugged from the
outlet when left unused for long periods of
time.
24. Lightning. For added protection for this
product during a lightning storm, or when it
is left unattended and unused for long peri-
ods of time, unplug it from the wall outlet
and disconnect the antenna or cable sys-
tem. This will prevent damage to the prod-
uct due to lightning and power-line surges.
25. Overloading. Do not overload wall out-
lets, extension cords, or integral conven-
ience receptacles, as this can result in a
risk of fire or electric shock.
26. Damage Requiring Service. Do not
attempt to service this product yourself, as
opening or removing covers may expose
you to dangerous voltage or other hazards.
Unplug this product from the wall outlet
and refer servicing to qualified service per-
sonnel under the following conditions:
a. The power-supply cord or the plug has
been damaged; or
b. Objects have fallen, or liquid has been
spilled into, the product; or
c. The product has been exposed to rain or
water; or
d. The product does not operate normally
when following the operating instruc-
tions. Adjust only those controls that are
covered by the operating instructions, as
an improper adjustment of other controls
may result in damage and will often
require extensive work by a qualified
technician to restore the product to its
normal operation; or
tions. Adjust only those controls that are
covered by the operating instructions, as
an improper adjustment of other controls
may result in damage and will often
require extensive work by a qualified
technician to restore the product to its
normal operation; or
e. The product has been dropped, or the
enclosure damaged; or
f. The product does not appear to operate
normally or exhibits a marked change in
performance.
performance.
27. Object and Liquid Entry. Never push
objects of any kind into this product
through openings, as they may touch dan-
gerous voltage points or short-out parts
that could result in a fire or electric shock.
Never spill liquid of any kind on the prod-
uct. The apparatus shall not be exposed to
dripping or splashing and no objects filled
with liquids, such as vases, shall be placed
on the apparatus.
28. Heat. The product should be situated
away from heat sources such as radiators,
heat registers, stoves or other products
(including amplifiers) that produce heat.
Avoid installation in extremely hot or cold
locations, in an area that is exposed to
direct sunlight or near heating equipment.
When positioning the product in its final
location, make certain that it has adequate
ventilation on all sides, as well as on the
top and bottom.
objects of any kind into this product
through openings, as they may touch dan-
gerous voltage points or short-out parts
that could result in a fire or electric shock.
Never spill liquid of any kind on the prod-
uct. The apparatus shall not be exposed to
dripping or splashing and no objects filled
with liquids, such as vases, shall be placed
on the apparatus.
28. Heat. The product should be situated
away from heat sources such as radiators,
heat registers, stoves or other products
(including amplifiers) that produce heat.
Avoid installation in extremely hot or cold
locations, in an area that is exposed to
direct sunlight or near heating equipment.
When positioning the product in its final
location, make certain that it has adequate
ventilation on all sides, as well as on the
top and bottom.
Declaration of Conformity
We, Harman Consumer International
2, route de Tours
72500 Château-du-Loir
France
72500 Château-du-Loir
France
declare in own responsibility, that the product
described in this owner’s manual is in compli-
ance with technical standards:
EN 60065:1998
EN 55013/A14:1999
EN 55020/A14:1999
EN 61000-3-2/A14:2000
EN 61000-3-3/1.1995
EN 50081-1:1992
EN 50082-1:1992
Gary Mardell
JBL,
Harman Consumer International
France, 03/02
Click on the first or last page to see other ATX 10C (serv.man3) service manuals if exist.