ATX 10C (serv.man3) - JBL Audio User Guide / Operation Manual. Page 7

Read JBL ATX 10C (serv.man3) User Guide / Operation Manual online

7
SPEAKER CONNECTIONS
 
 
 
 
 
 
Separate and strip the ends of
the speaker wire as shown.
Speakers and amplifiers/
receivers have corresponding
(+) and (–) terminals. The (+)
lead of the speaker wire is
noted with a stripe. It is impor-
tant to connect all the speakers
identically: (+) on the speaker
to (+) on the amplifier and (–) on
the speaker to (–) on the ampli-
fier. Wiring “out of phase”
results in thin sound, weak
bass and a poor stereo image.
Use Speaker-level connection
only if your surround receiver
does not have line-level sub-
woofer or LFE outputs. If a line-
level connection is available,
go to the next page.
For speaker-level connection,
connect loudspeaker cable
from the front left and right
loudspeaker outputs of your
Connection Tips
Speaker Level
amplifier/receiver to the corre-
sponding left and right IN termi-
nals on the subwoofer.
Then, connect loudspeaker
cable from left and right loud-
speaker OUT on the subwoofer
to the corresponding  input ter-
minals on the front left and right
loudspeakers.
Connect the remaining loud-
speakers directly to the receiv-
er. In the surround processor
set-up menu, the Left/Right
front speakers must be 
selected as "Large". All other
loudspeakers must be selected
as small.
Page of 10
Display

Click on the first or last page to see other ATX 10C (serv.man3) service manuals if exist.