TC 1000 TAKE CONTROL (serv.man7) - Harman Kardon Audio User Guide / Operation Manual. Page 29

Read Harman Kardon TC 1000 TAKE CONTROL (serv.man7) User Guide / Operation Manual online

25
Harman Kardon
Solution
Ensure that the serial cable
is connected properly to both the
computer-connector port and the
serial port. See “Connecting the
TC1000 to Your Computer,”
page 15.
Touchscreen
My backlight, contrast, and time
settings are lost.
Cause
Replacing the batteries or
pressing the reset button restores all
settings to their default
configuration.
Solution
Adjust the backlight, con-
trast, and time settings to your pref-
erence. See “Adjusting the Display
Time-Out,” page 13, “Adjusting the
Touchscreen Contrast,” page 11,
and “Setting the Time,” page 12, as
needed.
I cannot see the display.
Cause
The display timed out, turning
off the display.
Solution
Adjust the display setting to
your preference. See “Adjusting the
Display Time-Out,” page 13.
Cause
Dead batteries.
Solution
Replace the batteries. See
“Replacing the Batteries,” page 28.
Cause
The contrast is set too low.
Solution
Adjust the contrast setting.
See “Adjusting the Touchscreen
Contrast,” page 11.
The touchscreen remains blank
Causes
l
The batteries are low or dead.
l
The batteries were installed
incorrectly.
l
The batteries are old.
Solution
Replace all batteries. See
“Replacing the Batteries,” page 28.
Cause
The display timed out.
Solution
Increase the period
assigned to the Display Time-out
feature. See “Adjusting the Display
Time-Out,” page 13.
Cause
The contrast settings may be
set too low.
Solution
Adjust the contrast setting
to your preference. See “Adjusting
the Touchscreen Contrast,”
page 11.
I received a Low Batteries icon in the
title bar on my touchscreen.
Cause
The batteries are low.
Solution
Have fresh batteries ready
to replace all batteries when you
receive the Low Batteries warning.
See “Replacing the Batteries,”
page 28.
The Low Batteries warning appears in
the center of the touchscreen and then
the display disappears.
Cause
The batteries are too low to
provide proper operation.
Solution
Replace all batteries. See
“Replacing the Batteries,” page 28.
My batteries don't last very long.
Cause
Using the Backlight button
wears down the batteries when used
extensively.
Solution
l
Use the Backlight button less.
–or–
Reduce the period assigned to the
Display Time-out feature. See
“Adjusting the Display Time-Out,”
page 13.
76009mnl2.p65
9/1/98, 2:27 PM
25
Black
Page of 38
Display

Click on the first or last page to see other TC 1000 TAKE CONTROL (serv.man7) service manuals if exist.