Read Harman Kardon SUB-TS 7 EMC - CB Certificate online
page 28 of 31
Ref.No.:401597
IEC 60065
Clause
Requirement - Test
Result - Remark
Verdict
TRF No.: I60065__C
ZB
ANNEX ZB TO EN 60065, SPECIAL NATIONAL CONDITIONS
2.6.1
DK: certain types of Class
Ι apparatus, see 15.1.1,
may be provided with a plug not establishing
earthing continuity when inserted in Danish socket-
outlets
earthing continuity when inserted in Danish socket-
outlets
N
15.1.1
DK: mains cord for single-phase equipment having
a rated current not exceeding 10 A shall be
provided with a plug according to Heavy Current
Regulations Section 107-2-D1
a rated current not exceeding 10 A shall be
provided with a plug according to Heavy Current
Regulations Section 107-2-D1
P
DK: Class
Ι equipment with socket-outlets with
earthing contact, or which are intended to be used
in locations where protection against indirect
contact is required shall be provided with a plug in
compliance with Standard Sheet DK 2-1a
in locations where protection against indirect
contact is required shall be provided with a plug in
compliance with Standard Sheet DK 2-1a
N
DK: socket-outlets for providing power to Class
ΙΙ
equipment with a rated current of 2.5 A shall have
dimensions according to the drawing on page 131
of EN 60065:98 other dimensions shall be to
IEC 60083 Standard Sheet C 1a for portable
socket-outlets
dimensions according to the drawing on page 131
of EN 60065:98 other dimensions shall be to
IEC 60083 Standard Sheet C 1a for portable
socket-outlets
N
DK: mains socket-outlets with earthing contact
shall comply with Heavy Current Regulations
Section 107-2-D1, Standard Sheet DK 1-3a,
DK 1-5a or DK 1-7a
shall comply with Heavy Current Regulations
Section 107-2-D1, Standard Sheet DK 1-3a,
DK 1-5a or DK 1-7a
N
GB: equipment fitted with a flexible cable or cord
provided with a 13A BS 1363 plug as in Statutory
Instrument 1768:94
provided with a 13A BS 1363 plug as in Statutory
Instrument 1768:94
P
IE: equipment fitted with a flexible cable or cord
provided with a 13 A plug in accordance with
Statutory Instrument 525:97
provided with a 13 A plug in accordance with
Statutory Instrument 525:97
P
NO: mains socket-outlets on Class
ΙΙ equipment meet CEE Publication 7 with the
following amendments:
N
- dimensions 2.5 A, 250 V socket-outlets shall
comply with Standard Sheet 1 page 132 of
EN 60065:98
comply with Standard Sheet 1 page 132 of
EN 60065:98
N
- mechanical strength 2.5 A, 250 V socket-outlets
tested as specified in EN 60065, 12.1.3
tested as specified in EN 60065, 12.1.3
N
- protecting rim also tested
N
B.5.4.1
NO: marking required for equipment connected to
a communications network other than the public
telecommunications network, where separation
between the mains and the network relies upon a
safety earth connection
a communications network other than the public
telecommunications network, where separation
between the mains and the network relies upon a
safety earth connection
N
Click on the first or last page to see other SUB-TS 7 service manuals if exist.