Read Harman Kardon SoundSticks II EMC - CB Certificate online
Page 8 of 91
ST-05368
IEC 60950-1 / EN 60950-1
Clause
Requirement – Test
Result – Remark
Verdict
TRF No.: IECEN60950_1A
2
PROTECTION FROM HAZARDS
2.1
Protection from electric shock and energy hazards
2.1.1
Protection in operator access areas
P
2.1.1.1
Access to energized parts
See comment below
P
Test by inspection .............................................. : The concerned hazardous parts
are not accessible
P
Test with test finger ............................................ : The concerned hazardous parts
are not accessible
P
Test with test pin ................................................ : Hazardous live parts are not
accessible
P
Test with test probe ............................................ : No TNV circuit within the EUT
N/A
2.1.1.2 Battery
compartments ........................................ : No battery compartment within
the EUT
N/A
2.1.1.3
Access to ELV wiring
No ELV circuit within the EUT
N/A
Working voltage (V); minimum distance (mm)
through insulation
through insulation
2.1.1.4
Access to hazardous voltage circuit wiring
N/A
2.1.1.5 Energy
hazards
.................................................. : (see appended table 2.1.1.5)
P
2.1.1.6
Manual controls
No such devices
N/A
2.1.1.7
Discharge of capacitors in equipment
P
Time-constant (s); measured voltage (V)............ : 1 s, 52 Vpeak (limit: measured
max. voltage 348 Vpeak x 37%
= 128.7 Vpeak)
= 128.7 Vpeak)
2.1.2
Protection in service access areas
N/A
2.1.3
Protection in restricted access locations
N/A
2.2 SELV
circuits
2.2.1 General
requirements
P
2.2.2
Voltages under normal conditions (V)................. : Measured max. 24.41 Vdc
P
2.2.3
Voltages under fault conditions (V) ..................... : Measured max. 24.35 Vdc
(see also appended table 5.3)
P
2.2.3.1
Separation by double insulation or reinforced
insulation (method 1)
insulation (method 1)
P
Click on the first or last page to see other SoundSticks II service manuals if exist.