Read Harman Kardon SB 30 (serv.man2) EMC - CB Certificate online
Report No：W-N-1109009-CY-01-1
Telecom Technology Center
6.7.3 Deviation From Test Standard
p
No deviation
6.7.4 Test Setu
e:
Not
TA
The
standing on the
Ground Reference Plane. The GRP consisted of a sheet of aluminum at least 0.25mm
thic
thic
tem. A
Hor
to the
GR
40k total impedance. The equipment under test, was
inst
, and its
cables were placed on the HCP and isolated by an insulating support of 0.5mm
thic
thic
wal
FLO
The equipment under test was installed in a representative system as described in
FLO
The equipment under test was installed in a representative system as described in
lated from the Ground Reference
Pla
of a
of a
m that is at least 0.25mm thick, and 2.5meters square connected to the
sides.
BLE-TOP EQUIPMENT
configuration consisted of a wooden table 0.8 meters high
k, and 2.5 meters square connected to the protective grounding sys
izontal Coupling Plane (1.6m x 0.8m) was placed on the table and attached
P by means of a cable with 9
alled in a representative system as described in section 7 of IEC 61000-4-2
kness. A distance of1-meter minimum was provided between the EUT and the
ls of the laboratory and any other metallic structure.
OR-STANDING EQUIPMENT
section 7 of IEC 61000-4-2, and its cables were iso
ne by an insulating support of 0.1-meter thickness. The GRP consisted of a sheet
luminu
protective grounding system and extended at least 0.5 meters from the EUT on all
38
Click on the first or last page to see other SB 30 (serv.man2) service manuals if exist.