Read Harman Kardon PA 5800 (serv.man2) Service Manual online
2
Multichannel Power Amplifier
Harman Kardon
PA5800 / SIGNATURE 2.1
SPECIFICATIONS
PA5800
Power Requirements: . . . . . . . . . . . . . . . . . . 120V version: 120VAC, 50/60Hz
230V version: 230VAC, 50Hz
High Current Capability: . . . . . . . . . . . . . . . . 73 Amps
Power Output: . . . . . . . . . . . . . . . . . . . . . . . 5 x 80 watts @ 8 ohms
Power Output: . . . . . . . . . . . . . . . . . . . . . . . 5 x 80 watts @ 8 ohms
20Hz - 20KHz, <0.05% THD, All Channels Driven
Frequency Response: . . . . . . . . . . . . . . . . . 0.22Hz - 160kHz - 3dB at 1 watt
THD/IMD: . . . . . . . . . . . . . . . . . . . . . . . . . . Less than 110 at rated output
Power Bandwidth: . . . . . . . . . . . . . . . . . . . . <5hz - 160kHz
Input Sensitivity: . . . . . . . . . . . . . . . . . . . . . 1 volt for rated output
Input Impedance:. . . . . . . . . . . . . . . . . . . . . 33k ohms
Remote Trigger Voltage:. . . . . . . . . . . . . . . . 6 - 12 volts DC (tip of plug must be “positive”(+))
Remote Trigger Impedance: . . . . . . . . . . . . . 20K ohms
S/N Ratio (unweighted): . . . . . . . . . . . . . . . . >100dB
S/N Ratio (weighted): . . . . . . . . . . . . . . . . . . >115dB
Channel Separation
THD/IMD: . . . . . . . . . . . . . . . . . . . . . . . . . . Less than 110 at rated output
Power Bandwidth: . . . . . . . . . . . . . . . . . . . . <5hz - 160kHz
Input Sensitivity: . . . . . . . . . . . . . . . . . . . . . 1 volt for rated output
Input Impedance:. . . . . . . . . . . . . . . . . . . . . 33k ohms
Remote Trigger Voltage:. . . . . . . . . . . . . . . . 6 - 12 volts DC (tip of plug must be “positive”(+))
Remote Trigger Impedance: . . . . . . . . . . . . . 20K ohms
S/N Ratio (unweighted): . . . . . . . . . . . . . . . . >100dB
S/N Ratio (weighted): . . . . . . . . . . . . . . . . . . >115dB
Channel Separation
(1kHz):. . . . . . . . . . . . . . . . . . . . . . . . >95dB
(10kHz) . . . . . . . . . . . . . . . . . . . . . . . >80dB
Damping Factor
(40Hz):. . . . . . . . . . . . . . . . . . . . . . . . 1.54%
(1hz):. . . . . . . . . . . . . . . . . . . . . . . . . 1.46%
Idling Power Consumption: . . . . . . . . . . . . . . 26 watts
Full Power Consumption: . . . . . . . . . . . . . . . 773 watts
Dimensions (H x W x D): . . . . . . . . . . . . . . . 6-1/8 x 17-3/8 x 15-1/2 inches
Full Power Consumption: . . . . . . . . . . . . . . . 773 watts
Dimensions (H x W x D): . . . . . . . . . . . . . . . 6-1/8 x 17-3/8 x 15-1/2 inches
155 x 440 x 394 mm
Weight: . . . . . . . . . . . . . . . . . . . . . . . . . . . 30 lbs / 13.6 kg
Signature 2.1
Power Requirements: . . . . . . . . . . . . . . . . . . 120V version: 120VAC, 50/60Hz
230V version: 230VAC 50Hz
Power Output: . . . . . . . . . . . . . . . . . . . . . . . 5 x 100watts @ 8 ohms
20Hz - 20kHz, <0.03% THD, All Channels Driven
5 x 150 watts @ 4 ohms
20Hz - 20kHz, <0.03% THD, All Channels Driven
High-Current Capability: . . . . . . . . . . . . . . . . 100 Amps
Frequency Response: . . . . . . . . . . . . . . . . . <1hz - >160kHz
Power Bandwidth: . . . . . . . . . . . . . . . . . . . . <1hz - >160kHz
THD/IMD: . . . . . . . . . . . . . . . . . . . . . . . . . . <0.03% at rated output
Crosstalk . . . . . . . . . . . . . . . . . . . . . . . . . . <-87 dBr between any two channels at maximum output
Negative Feedback: . . . . . . . . . . . . . . . . . . . <25dB
Input Impedance:. . . . . . . . . . . . . . . . . . . . . 33K ohms
Input Sensitivity: . . . . . . . . . . . . . . . . . . . . . 1 volt for rated output
Remote Trigger Voltage:. . . . . . . . . . . . . . . . 6 - 12 volts DC (tip of plug must be “positive”(+))
Remote Trigger Impedance: . . . . . . . . . . . . . 20K ohms
Dimensions (H x W x D): . . . . . . . . . . . . . . . 7 ½ x 17 ¼ x 15 ¼ inches
Frequency Response: . . . . . . . . . . . . . . . . . <1hz - >160kHz
Power Bandwidth: . . . . . . . . . . . . . . . . . . . . <1hz - >160kHz
THD/IMD: . . . . . . . . . . . . . . . . . . . . . . . . . . <0.03% at rated output
Crosstalk . . . . . . . . . . . . . . . . . . . . . . . . . . <-87 dBr between any two channels at maximum output
Negative Feedback: . . . . . . . . . . . . . . . . . . . <25dB
Input Impedance:. . . . . . . . . . . . . . . . . . . . . 33K ohms
Input Sensitivity: . . . . . . . . . . . . . . . . . . . . . 1 volt for rated output
Remote Trigger Voltage:. . . . . . . . . . . . . . . . 6 - 12 volts DC (tip of plug must be “positive”(+))
Remote Trigger Impedance: . . . . . . . . . . . . . 20K ohms
Dimensions (H x W x D): . . . . . . . . . . . . . . . 7 ½ x 17 ¼ x 15 ¼ inches
191 x 438 x 387 mm
Weight: . . . . . . . . . . . . . . . . . . . . . . . . . . . 47 lbs/21 kg
Click on the first or last page to see other PA 5800 (serv.man2) service manuals if exist.