HS 350 (serv.man2) - Harman Kardon Audio EMC - CB Certificate (repair manual). Page 26

 

                                                                   Page 24 of 67                        Report No. JSH007120244-001 

 

IEC/EN 60065 

Clause 

Requirement – Test 

Result - Remark 

Verdict 

 

TRF No:  IEC/EN 60065H 

 

       TRF originator Intertek ETL SEMKO SH 

 

 

Biblio-
graphy 

the following standards: 

EN 50332-1:2000, Sound system equipment: Headphones and earphones 
associated with portable audio equipment — Maximum sound pressure level 
measurement methodology and limit considerations — Part 1: General method 
for "one package equipment" 

prEN 50332-2 (under consideration), Sound system 

 

N/A  

 

the following notes for the standards indicated: 

IEC 60130 

NOTE Parts 9 and 17:1998 are harmonized as ENs (not modified). 

IEC 60169 

NOTE Partly harmonized in the EN 60169/HD 134 series (not modified). 

IEC 60173 

NOTE Harmonized as HD 27 S1:1978 (not modified). 

IEC 60335-2-56 

NOTE Harmonized as EN 60335-2-56:1997 (not modified)

. 

IEC 60335-2-82 

NOTE Harmonized as EN 60335-2-82:2000 (not modified)

. 

IEC 60695 

NOTE Harmonized as EN 60695 series (not modified). 

IEC 61040 

NOTE Harmonized as EN 61040:1992 (not modified). 

IEC 61558-2-1 

NOTE Harmonized as EN 61558-2-1:1997 (not modified). 

IEC 61558-2-4 

NOTE Harmonized as EN 61558-2-4:1997 (not modified). 

IEC 61558-2-6 

NOTE Harmonized as EN 61558-2-6:1997 (not modified).

 

Pass  

 
 

ZB 

ANNEX ZB TO EN 60 065, SPECIAL NATIONAL CONDITIONS 

 

2.6.1 

DK: certain types of Class I apparatus, see 15.1.1, 
may be provided with a plug not establishing 
earthing continuity when inserted in Danish socket-
outlets 

Class II 

N/A 

13.3.1 

NO: In Norway, due to IT power distribution system 
used, the a.c. MAINS supply voltage is considered 
to be equal to the line-to-line voltage, and will 
remain 230V in case of a single earth fault. 

 Pass 

15.1.1 

DK: mains cord for single-phase equipment having 
a rated current not exceeding 10 A shall be 
provided with a plug according to Heavy Current 
Regulations Section 107-2-D1 

         

 Pass 

 

DK: Class I equipment with socket-outlets with 
earthing contact, or which are intended to be used 
in locations where protection against indirect 
contact is required shall be provided with a plug in 
compliance with Standard Sheet DK 2-1a 

         

 N/A