HS 100 EU - Harman Kardon Audio User Guide / Operation Manual. Page 6

6 FRONT PANEL CONTROLS

 Main Information Display: This display
delivers messages and status indications to help
you operate the HS 100 Controller.
1 Power On/Off (Standby): Press the button
once to turn the HS 100 Controller on, press it
again to put the unit in the Standby mode.
Note that when the HS 100 Controller is
switched on, the Power Indicator around the
button turns blue.
2 Open/Close: Press this button to open or
close the Disc Tray.
3 Play: Press to initiate playback.

4 Source: Press this button repeatedly to
scroll through the available audio and video
sources.
5 Stop: Press this button once to place the
disc in the Resume mode, which means that
playback will stop, but as long as the tray is not
opened or the disc changed, DVD playback will
continue from the same point on the disc when
the Play Button is pressed again. Resume will
also work if the unit was turned off. To stop a
disc and have play start from the beginning,
press the button twice.

6 Skip (Previous): Press this button to move
backward through the music tracks on a CD disc
or the chapters on a DVD disc.
7 Skip (Next): Press to move forward through
the music tracks on a CD or the chapters on a
DVD disc.
8 Headphone Jack: This jack may be used to
listen to the system's output through a pair of
headphones. Be certain that the headphones
have a standard 3.5 mm stereo phone plug.
Note that the main room speakers will automati-
cally be turned off when the headphone jack is
in use.

9 Volume Control: Turn this knob clockwise
to increase the volume, counterclockwise to
decrease the volume. If the system is muted,
adjusting volume control will automatically
release the unit from the silenced condition.

 Main Information Display
1 Power On/Off (Standby)
2 Open/Close

3 Play
4 Source
5 Stop

6 Skip (Previous)
7 Skip (Next)
8 Headphone Jack

9 Volume Control

1

2

9

6

7

3

5

4

8