HKTS 2BQ - Harman Kardon Audio EMC - CB Certificate (repair manual). Page 18

 
 

page 15 of 31 

Ref.No.: 609280 

IEC 60065 

Cl. 

Requirement - Test 

Result - Remark 

Verdict 

 

 

TRF No.: I60065__C 

 

15.3.5 

Terminals allow connection of appropriate cross-
sectional area of conductors, for the rated current 
of the equipment 

 P 

15.3.6 

Terminals to 15.3.3 have sizes required by Table 8  

N/A 

15.3.7 

Terminals clamp conductors between metal and 
have adequate pressure 

 N/A 

 

Terminals designed to avoid conductor slipping out 
when tightened or loosened 

 N/A 

 

Terminals adequately fixed to avoid loosening 
when the clamping is tightened or loosened and 
stress on internal wiring is avoided 

 N/A 

15.3.8 

Terminals carrying a current more than 0.2 A: 
contact pressure not transmitted by insulating 
material except ceramic 

 P 

15.3.9 

Termination of non-detachable cords: wires 
terminated near to each other 

 P 

 

Terminals located and shielded: test with 8 mm 
strand 

 P 

15.4 

15.4.1 

No undue strain on mains socket-outlets 

 

N/A 

15.4.2 

Device complies with standard for dimensions of 
mains plugs 

 N/A 

15.4.3 

Device has adequate mechanical strength (tests 
a,b,c) 

 N/A 

 

16.1 

Mains cords sheathed type, complying with 
IEC 60227 for PVC or IEC 60245 for synthetic 
rubber cords ............................................................ :

PVC  

P 

 

Non-detachable cords for Class 

Ι have 

green/yellow core for protective earth 

 N/A 

16.2 

Mains cords conductors have adequate cross-
sectional area for rated current consumption of the 
equipment 

2 x 0.75mm² 

P 

16.3 

a) Flexible cords not complying with 16.1, used for 
interconnections between separate units of 
equipment used in combination and carrying 
hazardous live voltages, have adequate dielectric 
strength 

 N/A 

 

b) Flexible cords not complying with 16.1, 
withstand bending and mechanical stress (3.2 of 
IEC 60227-2) 

 N/A