HKTS 210SUB - Harman Kardon Audio EMC - CB Certificate (repair manual). Page 7

Read Harman Kardon HKTS 210SUB EMC - CB Certificate online

Page 7 of 56 
 
Report No.1018947 
  
IEC60065  
Clause 
Requirement + Test 
Result - Remark 
Verdict 
 
 
TRF No. IEC60065J 
Constructional requirements with regard to the protection against electric 
shock 
 
8.1 
Conductive parts covered by lacquer, paper, 
untreated textile oxide films and beads etc. 
considered to be bare  
 P 
8.2 
No shock hazard when changing voltage setting 
device, fuse-links or handling drawers etc.  
 N/A 
8.3 
Insulation of hazardous live parts not provided by 
hygroscopic material  
 P 
8.4 
No risk of electric shock from accessible parts or 
from parts rendered accessible following the 
removal of a cover which can be removed by hand  
 P 
8.5 
Class I equipment  
 
N/A 
 
Basic insulation between hazardous live parts and 
earthed accessible parts  
 N/A 
 
Resistors bridging basic insulation complying with 
14.1 a)  
 N/A 
 
Capacitors bridging basic insulation complying with 
14.2.1 a)  
 N/A 
 
Protective earthing terminal  
 
N/A 
8.6 
Class II equipment and Class II constructions within Class I equipment  
 
 
Double or reinforced insulation between hazardous 
live parts and accessible parts  
Transformer T1, T2, DT1, CT1 
 
Components bridging double or reinforced 
insulation complying with 14.1 a) or 14.3  
 N/A 
 
Basic insulation bridged by components complying 
with 14.3.4.3.  
 N/A 
 
Basic and supplementary insulation each being 
bridged by a capacitor complying with 14.1 a)  
 N/A 
 
Double or reinforced insulation being bridged with 2 
capacitors in series complying with 14.2.1 a)  
 N/A 
 
Double or reinforced insulation being bridged with a 
single capacitor complying with 14.2.1 b)  
CY1, CY2, CY3, CY4 
8.7 
This clause is void  
 
 
Page of 56
Display

Click on the first or last page to see other HKTS 210SUB service manuals if exist.