FL 8550 (serv.man7) - Harman Kardon Audio User Guide / Operation Manual. Page 10

Remote Control Functions

8

a

Button:

Press this button to open or close the
disc drawer. The drawer may also be
closed by pressing the 

button

$ h. Do not push the drawer, as
damage to the transport mechanism
may result.

b

Press one

of these buttons to select the disc in
a specific position in the CD drawer.

c

Press these

buttons to select a specific track on a
disc. The FL8550 will immediately go
to the track and begin to play it. For
tracks 1 through 10 on a disc, you
need only press the desired number.
For tracks above, press the 

button d to select the first digit of
the track number, and then press the
second digit from these numeric
buttons. These buttons are also used
to enter track numbers into the
memory for pre-programmed play
lists. (See page 14 for complete
information on programming the
FL8550.)

d

Press this button to

select the first digit of a track number
above 10. Each press of the button
increases the first digit one
increment. Press it once to start
accessing tracks 11 through 20,
twice to start accessing tracks 21
through 30, and so forth. For
example, to select track 22, press the

button twice, and then press the

button c.

e

Press these

buttons to search forward — or
backwards ‚ through a disc to
locate a particular portion of the
selection being played.

f

Press one of

these buttons to move to the next
track fl·, or to move back to the
previous track ‡fi on the disc being
played.

g

Press this button to

stop the disc currently being played.

h

Press this button to

start the playback of a CD. If the CD
drawer is open, pressing this button
will automatically close the drawer.

i

Press this

button to put a disc into play, and 
to have all of the tracks played in a
random order. (See page 11 for more
information.)

j

Press this button

once to momentarily pause a disc.
When the button is pressed again,
the disc will resume play at the point
it was paused.

k

Press this button 

to put the FL8550 into the Intro Scan
mode. When you press this button, 
the unit will play the first 10 seconds 
of each track on the disc, and then
move to the next track. Press the
button again to defeat the function
and continue full play of the current
track. (See page 13 for more
information.)

l

In normal

operation, the display will show the
running time of the track being
played. Press the button once to
check the time remaining for the
track in play. Press the button again
to view the total play time remaining
for the disc in play.

m

Press this button

to remove tracks from a programmed
sequence. Each press of the button
will remove one track, starting with
the last track programmed to play.
(See page 13 for complete infor-
mation on programming the FL8550.)

n

This button 

is used to program the playback of 
a disc in a particular order. (See
page 14 for complete instructions on
programming the FL8550.)

o

Press this button

once to constantly repeat the track
currently being played. Press it a
second time to repeat the entire disc
and a third time to repeat all discs.
(See page 15 for more information.)

p

Press this

button to change to the next disc. If 
a disc position is empty, the FL8550
will automatically search for the next
position that contains a disc unless
the CD drawer is opened.