FL 8350 (serv.man3) - Harman Kardon Audio User Guide / Operation Manual. Page 8

Front Panel Controls

5

1

Press this switch

to turn the FL8350 on. When the
FL8350 is first connected to AC
power, the 

2

will turn green, and the 

Ó will illuminate. Press the

switch again to turn the unit off, and
the 

will turn

amber, indicating that the unit is in a
Standby mode. When the FL8350 is
connected to a switched AC outlet,
such as those found on the back of
many audio products and its power
switch is pressed down, it will return
to the ON mode when power is
applied to the switched outlet without
any further press of the switch.

2

When the

FL8350 is in the ON mode, this
indicator will glow green. When the
unit is off, the indicator will glow
amber, indicating that the unit is still
connected to the AC mains supply.

3

Connect a set

of standard headphones to this jack
for private listening.

4

Turn this

knob to increase or decrease the
volume level for headphones
connected to the FL8350’s

3. Note that

changing this level will not change
the sound level for the unit’s main
output, as that remains constant.

5

This drawer holds the

discs that will be played. Press the

button ! a to open

the drawer so that discs may be
inserted.

6

Press this button 

to select the time display. In normal
operation, the display will show the
running time of the track being
played. Press the button once to
check the time remaining for the
track in play. Press the button a
second time to view the total play
time remaining for the disc in play.

7

Press this button

once to constantly repeat the track
currently being played. Press it a
second time to repeat the entire disc
and a third time to repeat all discs.
(See page 14 for more information.)

8

Press this button to

put the FL8350 in the Intro Scan
mode. When you press the button,
the unit will play the first 10 seconds
of each track on the disc, and then
move to the next track. Press the
button again to defeat the function
and continue full play of the current
track. (See page 12 for more
information.)

9

Press this button to

remove tracks from a programmed
sequence. Each press of the button
will remove one track, starting with
the last track programmed to play.
(See page 13 for complete
information on programming the
FL8350.)

)

This button is

used to program the playback of a
disc in a particular order. (See page
13 for complete instructions on
programming the FL8350.)

!

Press this button to

open or close the disc drawer. DO
NOT push the drawer to close it.
Damage to the transport mechanism
may result.

@

Press this

button to put a disc into play, and to
have all of the tracks played in a
random order. (See page 11 for more
information.)

#

Press this button

once to momentarily stop a disc.
When the button is pressed again,
the disc will resume play at the point
it was stopped.

$

Press this button to

start the playback of a CD. If the CD
drawer is open, pressing this button
will automatically close the drawer.

%

Press this button to

stop the disc currently being played.
(See page 11 for more information.)

^

Press either side of

this button to move to the next track
fl·, or to move back to the previous
track ‡fi on the disc being played.

&

Press either side

of this button to search forward —
or backwards ‚ through a disc to
locate a particular portion of the
selection of the disc being played.

*

Press this

button to change to the next disc. If a
disc position is empty, the FL8350
will automatically search for the next
position that contains a disc unless
the CD drawer is opened.

(

Press one

of these buttons to select the disc in
a specific position in the CD drawer.

Ó

This display

provides details about the operation
of the FL8350.

Ô

The sensor

behind this window receives
commands from the remote control.
Keep this area clear if you wish to use
the FL8350 with a remote control.