Read Harman Kardon FL 8350 (serv.man3) User Guide / Operation Manual online
Installation
9
ENGLISH
To prevent possible damage to your
speakers and other components in your
audio system, it is important that ALL
components, including the FL8350 and
receivers are turned off and unplugged
from their AC power source when
installing any new component.
speakers and other components in your
audio system, it is important that ALL
components, including the FL8350 and
receivers are turned off and unplugged
from their AC power source when
installing any new component.
Connecting the FL8350 to your audio
system is simple. Using standard RCA-
to-RCA interconnect cords, connect the left
and right
system is simple. Using standard RCA-
to-RCA interconnect cords, connect the left
and right
Fixed Audio Output
jacks
∞
on the rear panel to the CD input jacks
on your receiver, surround processor or
preamplifier.
preamplifier.
If your system includes an optional,
external digital-to-analog converter, or if
you are using a receiver or other pro-cessor
that has the capability to decode PCM
digital input signals, connect the
external digital-to-analog converter, or if
you are using a receiver or other pro-cessor
that has the capability to decode PCM
digital input signals, connect the
Coaxial
Digital Output
jack
™
to the
Datastream Digital input on the decoder.
Make certain to use a coaxial-style
interconnect cable, as standard audio
cables will not perform as well.
Make certain to use a coaxial-style
interconnect cable, as standard audio
cables will not perform as well.
Install two AA batteries by turning the
remote over so that you are holding the
bottom side up. Press lightly on the
embossed arrow on the cover, and gently
slide the cover towards you in the direction
of the arrow. Insert the batteries inside the
compartment, being careful to follow the
remote over so that you are holding the
bottom side up. Press lightly on the
embossed arrow on the cover, and gently
slide the cover towards you in the direction
of the arrow. Insert the batteries inside the
compartment, being careful to follow the
+
and
–
polarity indications at the bottom
of the compartment. Replace the cover by
placing it on the remote and sliding it
back towards the top of the remote.
placing it on the remote and sliding it
back towards the top of the remote.
➞
NOTE: When replacing batteries it is
always a good idea to replace both at the
same time. When the unit will not be used
for an extended period of time, it is also a
good idea to remove the batteries so that
the potential for corrosion or damage is
avoided.
always a good idea to replace both at the
same time. When the unit will not be used
for an extended period of time, it is also a
good idea to remove the batteries so that
the potential for corrosion or damage is
avoided.
Connect the power to a non-switched AC
wall outlet, or to the accessory outlet on
the rear of another audio device in your
system and you are ready to go!
wall outlet, or to the accessory outlet on
the rear of another audio device in your
system and you are ready to go!
NOTE: When using the accessory outlet on
another product to power the FL8350 make
certain that it has the ability to power a
device that draws at least 20 watts of
current in addition to the requirements of
other devices that may be plugged into the
accessory outlets. If you use a “switched”
outlet, it is important to remember that the
host product must be turned on in order
for the FL8350 to operate.
another product to power the FL8350 make
certain that it has the ability to power a
device that draws at least 20 watts of
current in addition to the requirements of
other devices that may be plugged into the
accessory outlets. If you use a “switched”
outlet, it is important to remember that the
host product must be turned on in order
for the FL8350 to operate.
Click on the first or last page to see other FL 8350 (serv.man3) service manuals if exist.