Read Harman Kardon FESTIVAL 40 (serv.man3) User Guide / Operation Manual online
15
Programmed Play
It is possible to program up to 30 tracks into memory
to be played black in the specified order. Before
programming, the CD Changer must be stopped.
to be played black in the specified order. Before
programming, the CD Changer must be stopped.
1. Press
Program
"
on the front of the CD Changer
or
Memory
8
on the remote. The indicator
PROGRAM and track number 01 will blink in the
display.
display.
P 01 will appear to indicate that you are
now programming the first track in your selection.
2. Press
Disc
A
(remote) repeatedly until the
number of the desired CD appears or press the
Direct Play
7
number on the front of the CD
Changer corresponding to the position of the
desired CD.
desired CD.
3. While the indicator
PROGRAM is blinking, press the
number keys
4
(remote) corresponding to the
track you wish to program directly or select the
track with the
track with the
Skip
JH IK
3
(front) or
Preset
JH IK
C
buttons (remote) and
confirm the selection by pressing the
Program
"
or
Memory
8
button again. The selected track
number will also appear in the Music Calendar. If
PROGRAM stops blinking in the display before
you’ve entered all track numbers, press
you’ve entered all track numbers, press
Program
"
(front) or
Memory
8
again before you select
the next track.
4. Repeat the above steps for all the tracks you wish
to program. The Music Calendar will display the
numbers of all the programmed tracks from the
selected CD.
numbers of all the programmed tracks from the
selected CD.
5. To check the programmed selection, press
Program
"
(front) or
Memory
8
repeatedly to
cycle through all the programmed selections. You
may change any track at this time.
may change any track at this time.
When you have completed the program, press
Play
5
to start playing the program or press
Stop
1
if you do
not wish to hear the program immediately – the indi-
cator for all selected tracks in the Music Calendar will
be deleted but restored easily when pressing
cator for all selected tracks in the Music Calendar will
be deleted but restored easily when pressing
Program
"
(front) or
Memory
8
once. You can press
Play
5
at any time to start the program. You can skip to the
next or previous programmed track at any time, even
during program play, by pressing any
next or previous programmed track at any time, even
during program play, by pressing any
Skip
JH
IK
3
(front) or
Preset
JH IK
C
(remote) button.
To repeat the entire program continuously, press
Repeat
on the front of the CD Changer until
REPEAT ALL appears in the display before playing
the program or while the program is playing.
To repeat the first track of the program, press
the program or while the program is playing.
To repeat the first track of the program, press
Repeat
before playing the program until
REPEAT
ONE is displayed. To repeat any track in the program,
press
press
Repeat
while the desired track is playing.
To end repeat program play, press
Repeat
until
the indicator
REPEAT disappears from the display.
The program will play through to the end and then
stop.
Do not open the drawer while the player is stopped
after programming, unless you wish to erase the entire
program. You can also erase the program by pressing
stop.
Do not open the drawer while the player is stopped
after programming, unless you wish to erase the entire
program. You can also erase the program by pressing
Clear
on the front of the CD Changer, while the
program is playing or while the player is stopped. The
word
word
CLEAR will blink in the display as a warning.
Press
Clear
again to erase the program.
Repeat Play
The Festival 40 CD Changer allows you to repeat one
track, one CD or all three CD's until you choose to
stop play.
To repeat one track continuously, press
track, one CD or all three CD's until you choose to
stop play.
To repeat one track continuously, press
Repeat
on
the front of the CD Changer until the words
REPEAT
ONE appear in the display while the desired track is
playing. You may also press
playing. You may also press
Repeat
while the
player is stopped, then select the track and start
repeat play.
To repeat an entire CD continuously, press
repeat play.
To repeat an entire CD continuously, press
Repeat
repeatedly until the words
REPEAT ONE DISC
appear in the display while the desired CD is playing.
You may also press
You may also press
Repeat
while the player is
stopped, then select the CD and start repeat play.
To repeat all three CD's continuously, press
To repeat all three CD's continuously, press
Repeat
repeatedly until the words
REPEAT ALL DISCS
appear in the display. You may do so while a CD is
playing or while the player is stopped.
To end repeat play, press
playing or while the player is stopped.
To end repeat play, press
Repeat
repeatedly until
the word
REPEAT disappears from the display.
Normal play will continue.
Random Play
Festival 40 can play all tracks from all CDs in random
order (but not any program).
To start random play select the CD desired with
order (but not any program).
To start random play select the CD desired with
Disc
Skip
(front) or
Disc
A
(remote) and press
Random
!
on the front of the CD changer. You may
also press
Random
!
while any CD is playing.
To end random play, press
Random
!
until the word
RANDOM disappears from the display. Normal play will
continue.
continue.
RANDOM appears in the display, all track numbers in
the Music Calendar will be shuffled and one track
after another is selected randomly and played. After
one disc is played completely, random play will
continue with the next CD until all tracks on all CDs
are played.
the Music Calendar will be shuffled and one track
after another is selected randomly and played. After
one disc is played completely, random play will
continue with the next CD until all tracks on all CDs
are played.
Click on the first or last page to see other FESTIVAL 40 (serv.man3) service manuals if exist.