Read Harman Kardon ESQUIRE EMC - CB Certificate online
Page 10 of 84 Report No. EFSN13070410E-1
IEC 60950-1
Clause
Requirement + Test
Result - Remark
Verdict
TRF No. IEC60950_1C
1.7.2.5
Operator access with a tool
N/A
1.7.2.6
Ozone
The equipment does not
produce Ozone.
produce Ozone.
N/A
1.7.3
Short duty cycles
The equipment is designed for
continuous operation.
continuous operation.
N/A
1.7.4
Supply voltage adjustment ................................... : No Voltage adjustment.
N/A
Methods and means of adjustment; reference to
installation instructions ......................................... :
installation instructions ......................................... :
N/A
1.7.5
Power outlets on the equipment .......................... : No standard power outlet.
N/A
1.7.6
Fuse identification (marking, special fusing
characteristics, cross-reference) .......................... :
characteristics, cross-reference) .......................... :
N/A
1.7.7
Wiring terminals
N/A
1.7.7.1
Protective earthing and bonding terminals .......... :
N/A
1.7.7.2
Terminals for a.c. mains supply conductors
N/A
1.7.7.3
Terminals for d.c. mains supply conductors
N/A
1.7.8
Controls and indicators
See below
N/A
1.7.8.1
Identification, location and marking ..................... : No safety relevant indicators,
switches and controls
provided
provided
N/A
1.7.8.2
Colours ................................................................ :
N/A
1.7.8.3
Symbols according to IEC 60417......................... :
N/A
1.7.8.4
Markings using figures ....................................... :
No figures used
N/A
1.7.9
Isolation of multiple power sources ..................... :
N/A
1.7.10
Thermostats and other regulating devices .......... :
No thermostats or other
regulating devices.
regulating devices.
N/A
1.7.11
Durability
The marking plate was
subjected to the permanence
of marking test. The marking
plate was rubbed with cloth
soaked with water for 15s and
then again for 15s with the
cloth soaked with petroleum
spirit. After this test there was
no damage to the marking
plate. The marking on the
label did not fade. There was
no curling of the marking
plate.
subjected to the permanence
of marking test. The marking
plate was rubbed with cloth
soaked with water for 15s and
then again for 15s with the
cloth soaked with petroleum
spirit. After this test there was
no damage to the marking
plate. The marking on the
label did not fade. There was
no curling of the marking
plate.
P
1.7.12
Removable parts
No removable parts provided
N/A
1.7.13
Replaceable batteries ......................................... :
No replaceable batteries
provided
provided
N/A
Language(s) ........................................................ :
See above
Click on the first or last page to see other ESQUIRE service manuals if exist.