DVD 22 - Harman Kardon Audio EMC - CB Certificate (repair manual). Page 17

Read Harman Kardon DVD 22 EMC - CB Certificate online

 
 
page 15 of 35 
Ref.No.: 312941   
IEC 60065 
Clause 
Requirement - Test 
Result - Remark 
Verdict 
 
 
 
15.2 
Provision for protective earthing 
 
Accessible conductive parts of Class 
Ι equipment 
reliably connected to earth terminal, within 
equipment 
 N 
 
Class 
Ι supply equipment with non-hazardous live 
output voltage: output circuit not connected to 
earth 
 N 
 
Protective earth conductors correctly coloured 
 
 
Equipment with non-detachable mains cord 
provided with separate protective earth terminal 
near mains input 
 N 
 
Protective earth terminal resistant to corrosion 
 
 
Earth resistance (
Ω) ≤ 0.1 Ω at 25 A ...................... :  N 
15.3 
Terminals for external flexible cords and for permanent connection to the 
mains supply 
15.3.1 
Adequate terminals for connection of permanent 
wiring 
 N 
15.3.2 
Reliable connection of non-detachable cords: 
 
 
not soldered to conductors of a printed circuit 
board 
No P 
 
adequate clearances and creepage distances 
between connections should a wire break away 
 P 
 
wire secured by additional means to the conductor  Mating locking connector. 
15.3.3 
Screws and nuts clamping conductors have 
adequate threads: ISO 261, ISO 262 or similar 
 N 
15.3.4 
Soldered conductors wrapped around terminal 
prior to soldering or held in place by additional 
means 
 N 
 
Clamping of conductor and insulation if not 
soldered or held by screws 
Mating locking connector, both 
the conductor and insulation 
are crimped. 
15.3.5 
Terminals allow connection of appropriate cross-
sectional area of conductors, for the rated current 
of the equipment 
 N 
15.3.6 
Terminals to 15.3.3 have sizes required by Table 8  
Page of 109
Display

Click on the first or last page to see other DVD 22 service manuals if exist.