DVD 21 (serv.man14) - Harman Kardon Audio EMC - CB Certificate (repair manual). Page 9

 

 
 

page 9 of 31 

Ref.No.:JSH02*1896-001  

 

EN 60065 

Clause 

Requirement - Test 

Result - Remark 

Verdict 

 

become lossened 

12.1.3 Impact 

test 

 

P 

12.2 

Fixing of knobs, push buttons, keys and levers 

 

P 

12.3 

Remote controls with hazardous live parts 

 

N 

12.4 

Drawers (pull test 50 N, 10 s) 

 

P 

12.5 

Antenna coaxial sockets providing isolation 

 

N 

 

13.1 

Clearances and creepage distances in accordance 
with 13.2 (fig. 9); minimum distance  ...................... :

Prim.- sec.: 6.1mm on PCB 

Prim.- acc. parts.:6.2 near 
screw fixing hole 

P 

13.1.1 

Reduction applied if the 3 conditions are met  ....... : Yes, in TR1 or on PCB 

P 

 

Reduction applied for Grade 2 winding wire .......... : No 

N 

13.1.2 

Use of cemented joints ........................................... : No N 

 

Tests to confirm cemented joints 

 

N 

13.2 

Clearances and creepage distances of parts of 
different polarity connected to the mains, as in 
fig. 9; minimum distance  ........................................ :

3.0mm between tracks 

P 

 

Clearances and creepage distances between 
conductors on printed circuit boards, one of which 
may be conductively connected to the mains, as in 
fig. 10 

 N 

13.3 

Enclosed, enveloped or hermetically sealed parts: 
clearances and creepage distances to Table 4 

 N 

13.4 

Parts filled with insulating compound, meeting the 
requirements of 8.8 

 N 

13.5 

Type B coated printed circuit boards complying 
with IEC 60664-3 (basic insulation only) 

 N 

 

14.1 

 

a) Resistors between hazardous live parts and 
accessible metal parts 

(see appended table) 

N 

 

a) Resistors separately approved .......................... : No N 

 

b) Resistors, other than between hazardous live 
parts and accessible parts 

 N 

 

b) Resistors separately approved .......................... : No N 

14.2