Read Harman Kardon DVD 18 Service Manual online
29
Artwork number: 080-1437
1
HDMI Output
2
Coaxial Digital Output
3
AC Power Cord
�
�
�
ENGLISH
Rear Panel Connections
REAR PANEL CONNECTIONS
0
HDMI Output
1
Coaxial Digital Output
2
AC Power Cord
0
HDMI Output: Connect this output to an HDMI
input on the receiver or video display for the
highest-quality uncompressed digital audio
and video available. Even if your receiver is not
capable of processing audio in the HDMI format,
you may still experience the superb reproduction
of HDMI video.
highest-quality uncompressed digital audio
and video available. Even if your receiver is not
capable of processing audio in the HDMI format,
you may still experience the superb reproduction
of HDMI video.
The AVR Receiver in your AVR/DVD system can switch
between three HDMI inputs and send the video signal
to your screen from its HDMI Output. No surround
sound decoding takes place in the Receiver from
HDMI inputs, so no surround sound will be heard if
only HDMI is connected. you MUST connect the DVD
Player's Coaxial Digital Output to the AVR Receiver's
Coaxial Digital Input 2 to hear Dolby Digital and DTS
surround sound through your new AVR/DVD system.
between three HDMI inputs and send the video signal
to your screen from its HDMI Output. No surround
sound decoding takes place in the Receiver from
HDMI inputs, so no surround sound will be heard if
only HDMI is connected. you MUST connect the DVD
Player's Coaxial Digital Output to the AVR Receiver's
Coaxial Digital Input 2 to hear Dolby Digital and DTS
surround sound through your new AVR/DVD system.
If your video display has a DVI input, you may use
an optional HDMI-to-DVI cable or adapter for the
connection to the display.
an optional HDMI-to-DVI cable or adapter for the
connection to the display.
In all cases, the video display must be HDCP-compliant
in order to use the HDMI output.
in order to use the HDMI output.
For best results, we do not recommend HDMI
connections in excess of 3m (10 ft).
connections in excess of 3m (10 ft).
1
Coaxial Digital Output: Connect this jack to
the coaxial digital input of an A/V receiver or
surround processor for Dolby Digital, DTS or PCM
audio playback.
surround processor for Dolby Digital, DTS or PCM
audio playback.
The AVR Receiver in your AVR/DVD system has two
coaxial digital inputs. Be sure to connect the DVD
player’s Coaxial Digital Output to the Receiver’s Coaxial
Digital Input 2. you MUST connect the DVD Player's
Coaxial Digital Output to the AVR Receiver's Coaxial
Digital Input 2 to hear Dolby Digital and DTS surround
sound through your new AVR/DVD system.
coaxial digital inputs. Be sure to connect the DVD
player’s Coaxial Digital Output to the Receiver’s Coaxial
Digital Input 2. you MUST connect the DVD Player's
Coaxial Digital Output to the AVR Receiver's Coaxial
Digital Input 2 to hear Dolby Digital and DTS surround
sound through your new AVR/DVD system.
Note: The coaxial digital output should only be
connected to a digital input. Even though it is the
same RCA-type connector as standard analog audio
connections, DO NOT connect it to a conventional
analog input jack.
connected to a digital input. Even though it is the
same RCA-type connector as standard analog audio
connections, DO NOT connect it to a conventional
analog input jack.
2
AC Power Cord: Connect this plug to an AC
outlet. If the outlet is controlled by a switch,
make certain that it is in the ON position.
make certain that it is in the ON position.
Note: you’ll find more details about all Audio/Video
connections under Setup and Connections on the
following pages.
connections under Setup and Connections on the
following pages.
0220CSK - HK AVR-DVD System OM, WORK R2 01.indd 29
12/07/10 14:11:30
harman/kardon
DVD 16 and 18 /230V Service Manual
Page 14 of 39
Click on the first or last page to see other DVD 18 service manuals if exist.