Read Harman Kardon DVD 18 Service Manual online
11
Artwork number: 080-1437
ENGLISH
Rear Panel Connections
REAR PANEL CONNECTIONS
B
Video Monitor Output: Connect these jacks to
the composite input of a TV monitor or video projector
to view the output of any video source selected by the
receiver’s video switcher.
to view the output of any video source selected by the
receiver’s video switcher.
C
HDMI Inputs: Connect the HDMI output of video
sources such as a DVD player, set-top box or HDTV
tuner to either of these jacks.
tuner to either of these jacks.
D
HDMI Output: Connect this jack to the HDMI
input on a compatible HDMI-equipped video display.
E
Monitor Component Video Outputs: Connect
these outputs to the component video inputs of a
video projector or monitor. When a source connected
to one of the two Component Video Inputs 8F
is selected the signal will be sent to these jacks.
video projector or monitor. When a source connected
to one of the two Component Video Inputs 8F
is selected the signal will be sent to these jacks.
F
Video 2 Component Video Inputs: Connect
the y/Pr/Pb component video outputs of a DVD player
to these jacks.
to these jacks.
Note: All component inputs/outputs can be used for
RGB signals too, in the same way as described for the
y/Pr/Pb signals, then connected to the jacks with the
corresponding color.
RGB signals too, in the same way as described for the
y/Pr/Pb signals, then connected to the jacks with the
corresponding color.
RGB connection is not possible if the source outputs a
separate sync signal (see page 13).
separate sync signal (see page 13).
G
AC Power Cord: Connect the AC plug to an
unswitched AC wall output.
H
DVD Video Inputs: Connect these jacks to the
composite output jacks on a DVD player or other video
source.
source.
I
Video 1 Video Outputs: Connect these jacks to
the RECORD/INPUT composite jack on a VCR.
J
Video 2 Audio Inputs: Connect these jacks to the
PLAY/OUT audio jacks on a VCR or other video source.
K
Video 2 Video Inputs: Connect these jacks to the
PLAY/OUT composite jacks on a second VCR or other
video source.
video source.
L
Optical Digital Inputs: Connect the optical
digital output from a DVD player, HDTV receiver, LD
player, MD player or CD player to these jacks. The
signal may be either a Dolby Digital signal, a DTS
signal or a standard PCM digital source.
player, MD player or CD player to these jacks. The
signal may be either a Dolby Digital signal, a DTS
signal or a standard PCM digital source.
M
Video 1 Video Inputs: Connect these jacks to
the PLAY/OUT composite jacks on a TV or other video
source.
source.
N
6-Channel Direct Inputs: These jacks are used
for connection to source devices such as DVD-Audio or
SACD players with discrete analog outputs.
SACD players with discrete analog outputs.
O
Digital Audio Output: Connect this jack to the
matching digital input connector on a digital recorder.
PQS
Front/Center Speaker Outputs: Connect
these outputs to the matching + or – terminals on
your front/center speakers. When making speaker
connections, always make certain to maintain correct
polarity by connecting the red (+) terminals on the
AVR to the red (+) terminals on the speaker and
the black (–) terminals on the AVR to the black (–)
terminals on the speakers. (See page 14 for more
information on speaker polarity.)
your front/center speakers. When making speaker
connections, always make certain to maintain correct
polarity by connecting the red (+) terminals on the
AVR to the red (+) terminals on the speaker and
the black (–) terminals on the AVR to the black (–)
terminals on the speakers. (See page 14 for more
information on speaker polarity.)
RT
Surround Speaker Outputs: Connect these
outputs to the matching + or – terminals on your left
and right surround speakers. When making speaker
connections always make certain to maintain correct
polarity by connecting the red (+) terminals on the
AVR to the red (+) terminals on the speakers and
the black (–) terminals on the AVR to the black (–)
terminals on the speakers. See page 14 for more
information on speaker polarity.
and right surround speakers. When making speaker
connections always make certain to maintain correct
polarity by connecting the red (+) terminals on the
AVR to the red (+) terminals on the speakers and
the black (–) terminals on the AVR to the black (–)
terminals on the speakers. See page 14 for more
information on speaker polarity.
AVR/DVD System Connections
AVR/DVD System Connection Instructions:
Connect your system like this, using the HDMI cable
and the digital audio cable included with the DVD
player:
and the digital audio cable included with the DVD
player:
Connect the DVD player's HDMI output
1.
0
to the
receiver's HDMI 1 input C. NOTE: Do not use any
other input for this connection.
other input for this connection.
Connect the DVD player's Digital Audio Out
2.
1
to the
receiver's Coaxial 2 digital audio input 9. NOTE:
Do not use any other input for this connection.
Do not use any other input for this connection.
Connect the receiver's HDMI Monitor Out
3.
D
to your
TV's HDMI input connector.
IMPORTANT: you MUST connect the DVD Player's
Coaxial Digital Output to the AVR Receiver's Coaxial
Digital Input 2 to hear Dolby Digital and DTS surround
sound through your new AVR/DVD system.
Coaxial Digital Output to the AVR Receiver's Coaxial
Digital Input 2 to hear Dolby Digital and DTS surround
sound through your new AVR/DVD system.
AVR
To HDMI In
Digital Audio Cable
(supplied with
DVD player)
(supplied with
DVD player)
HDMI Cable
(supplied with
DVD player)
HDMI Cable (not supplied)
DVD Player
TV
0220CSK - HK AVR-DVD System OM, WORK R2 01.indd 11
12/07/10 14:11:27
harman/kardon
DVD 16 and 18 /230V Service Manual
Page 11 of 39
Click on the first or last page to see other DVD 18 service manuals if exist.