DPR 1005 (serv.man2) - Harman Kardon Audio User Guide / Operation Manual. Page 51

PROGRAMMING THE REMOTE  51

Volume Punch-Through
Follow these steps to enable the Volume
Up/Down and Mute controls from one device to
be used when the remote is otherwise pro-
grammed for a different device.

Note for Volume Punch-Through:
The remote’s default settings are for the DPR’s
volume controls to be used when any input or
device is selected with the exception of the VID
2/TV button. There is no need to program the
remote for volume punch-through for the DPR’s
controls with other sources, such as DVD. To have
the DPR’s volume commands used when the TV
device is selected, follow these steps:

1. Press and hold the Program Button

& for

about three seconds while the message shown 
in Figure 15 appears in the remote’s LCD
Information Display 

2. Release the button

when the red light under the Set Button

F

appears.

2. The remote’s 

MAIN MENU

message (Figure

16), will appear in the LCD display and the
Set Button

F will remain illuminated in

red. Press the 

⁄¤

E

until 

PUNCH-THROUGH

appears on the bot-

tom line of the LCD screen, as shown in Figure
48. Press the Set Button

F to enter the

main punch-through menu branch.

3. At the next menu screen (Figure 49) press the 

F to begin programming the

remote for Volume punch-through.

4. The next display screen (Figure 50) is where

you select the device that will receive the
punch-through commands. In our example,
that is the VID 2/TV button, as that is where
we want the DPR’s volume controls to be
active. Press the 

⁄¤

E until the name of the base device appears
and then press the Set Button

F.

5. At the next display screen (Figure 51), you will

select the device whose Volume Up/Down and
Mute commands will be used. Press the 

⁄¤

E until the desired

device’s name appears to the right of the
device in use. In our example, that is the DPR
(indicated by 

DPR

). When the desired 

combination of devices appears, press the Set
Button

F.

6. When the Set button is pressed, the display

will change to show you that the new combi-
nation of control commands is being saved to
the unit’s memory, as shown in Figure 52. The
word 

SAVED

will flash four times and then

the remote will return to normal operation.

7. Once the punch-through is programmed, the

Volume Up/Down and Mute buttons of the
second device named will be used when those
buttons 

), are pressed while the master

device is in use.

Returning the Volume Control Settings to 
Default Operation:
If you wish to remove the Volume punch-through
so that the commands for Volume and Mute are
returned to the factory default setting, follow the
steps shown above, except that in Steps 4 and 5,
select the same device for both the 

DEVICE IN

USE

on the left side of the bottom line and the

PUNCH-THROUGH

device. In the example used,

the display to return the remote to default set-
tings will appear as shown in Figure 53.

Channel Punch-Through
Channel punch-through allows the Channel
Up/Down buttons to send commands to a differ-
ent device than the one that has been selected
for other commands. For example, you may wish
to use a cable box or satellite receiver as the
source for a VCR, so you would want the
Channel Up/Down Selectors

+ to transmit

commands to the cable box even though the
other button commands are programmed to
operate the VCR.

To program the DPR for Channel punch-through,
follow these steps. This example will show how
to program channel punch-through so that the
commands programmed for Channel Up/Down
for the VID 3/ Cable device will be transmitted
when the VID 1/VCR device has been selected as
the current device.

1. Press and hold the Program Button

& for

about three seconds while the message shown 
in Figure 15 appears in the remote’s LCD
Information Display

2. Release the but-

ton when the red light under the Set Button
F appears.

2. The remote’s 

MAIN MENU

message (Figure

16), will appear in the LCD display and the
Set Button

F will remain illuminated in

red. Press the 

⁄¤

E

until 

PUNCH-THROUGH

appears on the bot-

tom line of the LCD screen, as shown in Figure
48. Press the Set Button

F to enter the

main punch-through menu branch.

3. At the next menu screen, press the 

⁄¤

E until 

CHANNEL

appears on the bottom line of the LCD screen,
as shown in Figure 54. Press the Set Button
F to begin programming the remote for
Channel punch-through.

4. The next display screen (Figure 55) is where

you select the device that will receive the
punch-through commands. In our example,
that is the VID 1/VCR button, as that is where
we want the cable box’s channel controls to
be active. Press the 

⁄¤

E until the name of the base

device appears and then press the Set
Button

F.

5. At the next display screen (Figure 56), you will

select the device whose Channel Up/Down
commands will be used. Press the 

⁄¤

E until the desired

device name appears to the right of the device
in use. In our example, that is the cable box.
When the desired combination of devices
appears, press the Set Button

F.

6. When the Set button is pressed, the display

will change to show you that the new combi-
nation of control commands is being saved to
the unit’s memory, as shown in Figure 57. The
word 

SAVED

will flash four times and then

the remote will return to normal operation.

7. Once the punch-through is programmed, the

channel up/down buttons of the second device
named will be used when those buttons 

+

are pressed while the master device is in use.

Returning the Channel Control Settings to
Default Operation:
If you wish to remove the Channel Punch-
Through so that the commands for Channel
Up/Down are returned to the factory default set-
ting, follow the steps shown above, except that
in Steps 4 and 5, select the same device for both

V C R

< - C B L   [ C H A N ]

            S A V E D

P U N C H - T H R O U G H

V C R < - C B L

D E V I C E   I N   U S E

V C R

P U N C H - T H R O U G H

C H A N N E L

P U N C H - T H R O U G H

T V < - T V

T V

< - A V R   [ V O L ]

            S A V E D

P U N C H - T H R O U G H

T V < - A V R

D E V I C E   I N   U S E

T V

P U N C H - T H R O U G H

V O L U M E

M A I N   M E N U

P U N C H - T H R O U G H