BDS 5 - Harman Kardon Audio Service Manual (repair manual). Page 4

Read Harman Kardon BDS 5 Service Manual online

BDS
5
Receiver Front-Panel Controls
Disc Slot: insert a compatible disc into the slot. the BDs receiver’s disc player will 
accept 5-inch (12cm) and 3-inch (8cm) discs.
Information  Display:  Various  messages  appear  on  this  display  in  response  to 
commands and to show the audio/video that is playing, the settings or other aspects 
of the BDs receiver’s status as described throughout this manual.
Eject  Button  (on  top  of  unit):  press  this  button  to  eject  a  disc  from  the  BDs 
receiver’s built-in disc player. Before pressing this button, make sure no objects are 
blocking the disc-slot opening. note: if you do not remove the ejected disc within 
90 seconds, it will automatically re-load back into the disc player for protection.
Standby Button (on top of unit): this button toggles the receiver between the on 
and standby modes.
Power Indicator: this LeD surrounds the standby button. when the BDs receiver 
is plugged into ac power, the LeD turns amber to indicate that the receiver is in 
standby mode (ready to be turned on). when you turn the BDs receiver on (by the 
standby button or the remote control’s power button), the LeD turns white
Headphone Jack: insert the 3.5mm stereo mini connector from a set of headphones 
into  this  jack.  note:  when  a  plug  is  inserted  into  the  Headphone  jack,  the  BDs 
receiver’s  speaker  outputs  automatically  mute;  the  HDMi  audio  output  remains 
active.
Volume  Control:  rotate  the  disc  clockwise  to  raise  the  volume;  rotate 
counterclockwise  to  lower  the  volume.  the  volume  level  will  appear  on  the 
information Display and on the on-screen menu.
IMPORTANT:  Do  not  turn  the  receiver’s  Volume  control  up  to  or  past  the  point 
where the audio from the speakers becomes distorted. Doing so can damage the 
speakers.
USB 2.0 Port: gently insert a flash drive or HDD disk drive with a UsB standard-a 
cable to this port. 
IMPORTANT: Do not connect a PC or other USB host/controller to this port, or 
you may damage both the BDS receiver and the other device.
orient the device’s plug so it fits all the way into the BDs receiver’s UsB connector. 
you may insert or remove the device at any time – there is no installation or ejection 
procedure.
Receiver Front-Panel Controls
Disc slot
information Display
Headphone Jack
Volume control
eject Button 
(on top panel)
standby Button 
(on top panel)
UsB port
Harman Kardon
BDS 2 / BDS 5 Service Manual
Page 4 of 66
Page of 66
Display

Click on the first or last page to see other BDS 5 service manuals if exist.