Read Harman Kardon BDS 5 Service Manual online
harman/kardon
Service Manual
HK BDS 2 / BDS 5
2 x 65W and 5 X 65w multi-voltage Blu-ray home cinema
receivers
receivers
CONTENTS
FFFF
ADDEDFSF
OWNER’S MANUAL INTRODUCTION
2
TROUBLESHOOTING CHARTS
11
BDS SYSTEM ACCESSORIES
3
EXPLODED VIEW AND PARTS
22
FRONT AND REAR PANELS
4 PARTS LIST6
23
REMOTE CONTROL FUNCTIONS
6 $'',7,21$/63$5(3$576
TROUBLESHOOTING GUIDE
8
PCB DRAWINGS
2
BASIC SPECIFICATIONS
9
WIRING DIAGRAM
3
SCHEMATIC DIAGRAMS
3
SOFTWARE UPGRADE PROCESS0
Released EU2010 Harman
Consumer Group, Inc.
Rev , 0/2012
8500 Balboa Boulevard
Northridge, California 91329
Harman Kardon
BDS 2 / BDS 5 Service Manual
Page 1 of 66
IMPORTANT INFORMATION ABOUT PAIRING NEW LOADER
WITH MAIN BOARD ON PAGE 65-66.
Verify Line Voltage Before Using, Unpacking, Installation Location,
Cleaning, Moving the Receiver and Introduction
3
BDS
Introduction
please register your product on our web site at
www.harmankardon.com.
note: you’ll need the product’s serial number.
note: you’ll need the product’s serial number.
at the same time, you can choose to be
notified about our new products and/or special
promotions.
Thank You for Choosing harman kardon
®
Products!
in the years since harman kardon engineers invented the high-fidelity receiver, we have
taken to heart this philosophy: Bringing the joy of home entertainment to as many people
as possible, adding performance and ease-of-use features that enhance the experience.
the BDs series of home entertainment systems offers a complete home entertainment
solution with a wealth of listening and viewing options in one sleek receiver. each BDs
series system also includes a 5.1-channel, 2.1-channel or soundbar loudspeaker system,
a system remote control and all the cables and accessories you need to enjoy movies
and music in your own home, when you use them with your television or video display.
to get the maximum enjoyment from your new BDs system, we urge you to read this
to get the maximum enjoyment from your new BDs system, we urge you to read this
manual thoroughly and refer back to it as you become more familiar with your new
system’s features and their operation.
if you have any questions about this product, its installation or its operation, please
if you have any questions about this product, its installation or its operation, please
contact your retailer or custom installer, or visit our web site at www.harmankardon.com.
Verify Line Voltage Before Using
your BDs receiver has been designed for use with 110 – 240-volt, 50Hz/60Hz ac current.
your subwoofer has been designed for use with either 120-volt, 60Hz or 220 – 240-volt,
50/60Hz ac current, depending on where your system was sold. the receiver includes a
detachable iec power cable designed for use in the region where the system is sold.
connection to a line voltage other than that for which the units are intended can create
connection to a line voltage other than that for which the units are intended can create
a safety and fire hazard and may damage the units. if you have any questions about
the voltage requirements for your specific model or about the line voltage in your area,
contact your dealer before plugging the unit into a wall outlet.
Unpacking
the carton and shipping materials used to protect your new player during shipment were
specially designed to cushion it from shock and vibration. we suggest that you save the
carton and packing materials for use in shipping if you move or if the unit ever needs
repair.
to minimize the size of the carton in storage, you may wish to flatten it. you can do it by
to minimize the size of the carton in storage, you may wish to flatten it. you can do it by
carefully slitting the tape seams on the carton’s bottom and collapsing it. you can store
cardboard inserts in the same manner. packing materials that cannot be collapsed should
be saved along with the carton in a plastic bag.
if you do not wish to save the packaging materials, please note that the carton and
if you do not wish to save the packaging materials, please note that the carton and
other sections of the shipping-protection materials are recyclable. please respect the
environment and discard those materials at a local recycling center.
remove the protective plastic film from the front-panel lens. Leaving the film in place will
remove the protective plastic film from the front-panel lens. Leaving the film in place will
affect the performance of your remote control.
Installation Location
• to ensure proper operation and to avoid the potential for safety hazards, place the
unit on a firm and level surface. when placing the unit on a shelf, be certain that the
shelf and any mounting hardware can support the weight of the product.
• provide proper space both above and below the unit for ventilation. if this product will
be installed in a cabinet or other enclosed area, make certain that there is sufficient
air movement within the area. Under some circumstances, a fan may be required.
• Do not place the unit directly on a carpeted surface.
• avoid installation in extremely hot or cold locations or in an area that is exposed to
direct sunlight or heating equipment.
• avoid moist or humid locations.
• Do not obstruct the fan vents on the rear panel or the ventilation slots on the top and
sides of the unit or place objects directly over or next to them.
• Do not place the receiver directly on top of a product that generates excessive
heat.
• Due to the heat generated by the receiver and other components in your system,
there is the remote possibility that the rubber padding on the bottom of the unit’s
feet may leave marks on certain wood or wood-veneer materials. Use caution when
placing the unit on soft woods or other materials that heat or heavy objects may
damage. some surface finishes may be particularly sensitive to absorbing such
marks, due to a variety of factors beyond harman kardon control, including the
nature of the finish, cleaning materials used, normal heat and vibration caused by
the use of the product, or other factors. your warranty will not cover this type of
damage to furniture, so exercise caution in choosing an installation location for the
component and in performing normal maintenance practices.
• your new harman kardon
®
Blu-ray Disc
™
player requires a broadband internet
connection for BD-Live
™
interactivity.
Cleaning
Receiver
when the receiver gets dirty, wipe it with a clean, soft, dry cloth. if necessary, and only
after unplugging the ac power cord, wipe it with a soft cloth dampened with mild soapy
water, then a fresh cloth with clean water. wipe it dry immediately with a dry cloth. neVer
use benzene, aerosol cleaners, thinner, alcohol or any other volatile cleaning agent. Do
not use abrasive cleaners, as they may damage the finish of metal parts. avoid spraying
insecticide near the unit.
Speakers and Subwoofer
when needed, use a soft cloth to remove any fingerprints or dust from the enclosures or
grilles. note: Do not use any cleaning products or polishes on the enclosures or grilles.
Moving the Receiver
Before moving the receiver, disconnect any interconnection cords to other components,
and disconnect the unit from its ac outlet.
NOTE: the built-in Blu-ray Disc/DVD player in your BDs receiver is designed
and manufactured for compatibility with region management information that is
encoded on most Blu-ray Disc recordings and DVD recordings:
•
BDS receivers sold in the USA are designed only for playback of discs
with Blu-ray Disc region code a and DVD region code 1 information, or
for discs that do not contain any region code information.
•
BDS receivers sold in Europe are designed only for playback of discs with
Blu-ray Disc region code B and DVD region code 2 information, or for
discs that do not contain region code information.
if there is a region code on a disc other than the one your BDs player is designed
for, it will not play in your BDs receiver.
Harman Kardon
BDS 2 / BDS 5 Service Manual
Page 2 of 66
System Components and Supplied Accessories
BDS
4
System Components
your BDs system includes the following components:
BDS 800 System
1 x BDs 5 5.1-channel Blu-ray Disc receiver
4 x sat-ts60 satellite speakers
1 x sat-ts60 center speaker
1 x Hkts200sUB powered subwoofer
BDS 700 System
1 x BDs 5 5.1-channel Blu-ray Disc receiver
4 x sat-ts7 satellite speakers
1 x cen-ts7 center speaker
1 x Hkts200sUB powered subwoofer
BDS 600 System
1 x BDs 5 5.1-channel Blu-ray Disc receiver
1 x sB10 soundbar speaker
1 x Hkts210sUB powered subwoofer
BDS 400 System
1 x BDs 2 2.1-channel Blu-ray Disc receiver
2 x sat-ts60 satellite speakers
1 x Hkts200sUB powered subwoofer
BDS 300 System
1 x BDs 2 2.1-channel Blu-ray Disc receiver
2 x sat-ts11 satellite speakers
1 x Hkts200sUB powered subwoofer
Supplied Accessories
if any of these items are missing, please contact harman kardon customer service via
www.harmankardon.com.
BDS 800, BDS 400 Systems
BDS 700, BDS 300 Systems
BDS 600 System
DISC
AUX
iPOD
RADIO
SETTINGS
DISPLAY
A - B
REPEAT
2
EJECT
POWER
TV
1
3
5
4
6
8
0
7
9
CLEAR
HOME
FIND
OPTIONS
SURROUND
OK
TOP MENU
POP-UP
EXIT
+
+
–
–
VOLUME
CHANNEL
MUTE
THUMBNAIL
ZOOM
BOOKMARK
PROGRAM
system
remote
control
DISC
AUX
iPOD
RADIO
SETTINGS
DISPLAY
A - B
REPEAT
2
EJECT
POWER
TV
1
3
5
4
6
8
0
7
9
CLEAR
HOME
FIND
OPTIONS
SURROUND
OK
TOP MENU
POP-UP
EXIT
+
+
–
–
VOLUME
CHANNEL
MUTE
THUMBNAIL
ZOOM
BOOKMARK
PROGRAM
system
remote
control
satellite speaker
wall-mount brackets
(four with BDs 800
system, two with
BDs 400 system)
Metal stop plates
and screws for
satellite speaker
wall-mount
brackets (four
with BDs 800
system, two with
BDs 400 system)
center speaker wall-
mount bracket (BDs
800 system only)
two 5-meter (16.4-foot)
speaker cables – red and
white color bands
two 5-meter (16.4-foot)
speaker cables – red and
white color bands
one 4-meter (13.1-foot)
speaker cable for center
speaker – green color band
(BDs 800 system only)
one 4-meter (13.1-foot) speaker
cable for center speaker – green
color band (BDs 700 system only)
two 10-meter (32.8-foot) speaker cables
for rear satellites – gray and blue color
bands (BDs 800 system only)
two 10-meter (32.8-foot) speaker cables
for rear satellites – gray and blue color
bands (BDs 700 system only)
one mono rca audio cable for
connection to the subwoofer –
purple connectors
one mono rca audio cable for
connection to the subwoofer –
purple connectors
fM wire antenna
fM wire antenna
HDMi
™
cable
HDMi cable
satellite speaker wall-
mount brackets and
hardware (four with
BDs 700 system, two
with BDs 300 system)
one center speaker
wall-mount bracket
(BDs 700 system only)
DISC
AUX
iPOD
RADIO
SETTINGS
DISPLAY
A - B
REPEAT
2
EJECT
POWER
TV
1
3
5
4
6
8
0
7
9
CLEAR
HOME
FIND
OPTIONS
SURROUND
OK
TOP MENU
POP-UP
EXIT
+
+
–
–
VOLUME
CHANNEL
MUTE
THUMBNAIL
ZOOM
BOOKMARK
PROGRAM
system
remote
control
three speaker cables
one mono rca audio cable for
connection to the subwoofer –
purple connectors
fM wire antenna
HDMi cable
two soundbar wall-
mount brackets
two rubber feet
Harman Kardon
BDS 2 / BDS 5 Service Manual
Page 3 of 66
BDS
5
Receiver Front-Panel Controls
Disc Slot: insert a compatible disc into the slot. the BDs receiver’s disc player will
accept 5-inch (12cm) and 3-inch (8cm) discs.
Information Display: Various messages appear on this display in response to
Information Display: Various messages appear on this display in response to
commands and to show the audio/video that is playing, the settings or other aspects
of the BDs receiver’s status as described throughout this manual.
Eject Button (on top of unit): press this button to eject a disc from the BDs
Eject Button (on top of unit): press this button to eject a disc from the BDs
receiver’s built-in disc player. Before pressing this button, make sure no objects are
blocking the disc-slot opening. note: if you do not remove the ejected disc within
90 seconds, it will automatically re-load back into the disc player for protection.
Standby Button (on top of unit): this button toggles the receiver between the on
Standby Button (on top of unit): this button toggles the receiver between the on
and standby modes.
Power Indicator: this LeD surrounds the standby button. when the BDs receiver
Power Indicator: this LeD surrounds the standby button. when the BDs receiver
is plugged into ac power, the LeD turns amber to indicate that the receiver is in
standby mode (ready to be turned on). when you turn the BDs receiver on (by the
standby button or the remote control’s power button), the LeD turns white.
Headphone Jack: insert the 3.5mm stereo mini connector from a set of headphones
Headphone Jack: insert the 3.5mm stereo mini connector from a set of headphones
into this jack. note: when a plug is inserted into the Headphone jack, the BDs
receiver’s speaker outputs automatically mute; the HDMi audio output remains
active.
Volume Control: rotate the disc clockwise to raise the volume; rotate
Volume Control: rotate the disc clockwise to raise the volume; rotate
counterclockwise to lower the volume. the volume level will appear on the
information Display and on the on-screen menu.
IMPORTANT: Do not turn the receiver’s Volume control up to or past the point
IMPORTANT: Do not turn the receiver’s Volume control up to or past the point
where the audio from the speakers becomes distorted. Doing so can damage the
speakers.
USB 2.0 Port: gently insert a flash drive or HDD disk drive with a UsB standard-a
USB 2.0 Port: gently insert a flash drive or HDD disk drive with a UsB standard-a
cable to this port.
IMPORTANT: Do not connect a PC or other USB host/controller to this port, or
IMPORTANT: Do not connect a PC or other USB host/controller to this port, or
you may damage both the BDS receiver and the other device.
orient the device’s plug so it fits all the way into the BDs receiver’s UsB connector.
orient the device’s plug so it fits all the way into the BDs receiver’s UsB connector.
you may insert or remove the device at any time – there is no installation or ejection
procedure.
Receiver Front-Panel Controls
Disc slot
information Display
Headphone Jack
Volume control
eject Button
(on top panel)
standby Button
(on top panel)
UsB port
Harman Kardon
BDS 2 / BDS 5 Service Manual
Page 4 of 66
