BDP 10 - Harman Kardon Audio Service Manual (repair manual). Page 12

Remote Infrared (IR) Input and Output: When the front-panel 
Remote IR sensor is blocked, connect the IR Output of your receiver/
processor or an optional IR receiver to the Remote IR Input jack. The 
Remote IR Output may be connected to the Remote IR Input of a 
compatible product for remote control through the BDP 10. When 
several devices are used, connect them in “daisy chain” fashion.

Composite Video Output:

or component video inputs, connect this video output to your A/ V 
receiver/processor or directly to the display.

Component Video Outputs: If your A/ V receiver, surround processor 
OR

Analog Audio Outputs:

optical or coaxial digital audio connection, connect these jacks to the 
A/V receiver or TV. Connect these jacks in addition to a digital audio 
connection to make recordings for personal use, or for a multizone 
system.

Coaxial and Optical Digital Audio Outputs: If your A/ V receiver 
or surround processor is not capable of processing the audio from an 
($-)

HDMI Output:

display device. If your A/ V receiver or surround processor is capable of 
DECODING

NOTE: If your A/V receiver or video display uses DVI connections, 
USE

Network Jack: Connect this standard RJ45 jack to a broadband 
network (Ethernet) connection so that you may take full advantage 
of BD-Live updates, features and enhancements of the BonusView 
system. When the network connection is “live,” the lights on either side 
of the jack will flash to indicate network activity.

NOTE: When the BDP 10 is used with an IP-based or wireless 
control device, connect a router/access point here, making certain 
that one connection runs from the router to a broadband Internet 
connection.

Master Power Switch: Flip on to apply power to the BDP 10,
placing it in the Standby mode. When the unit will not be used for an 
extended period of time, or whenever it is necessary to remove the 
unit from the AC power lines, flip the switch off.

AC Power Input: Connect the supplied AC power cord to this socket 
first, and then to an unswitched AC outlet. Should the cord become 
damaged, contact your authorized Harman Kardon dealer for a 
replacement.

Fan Vents: This area contains vents used by the BDP 10’s fan to cool 
THE

for BDP10

12

harman/kardon

BDP 1 / BDP 10 Service Manual