Read Harman Kardon AVR 75 (serv.man2) Service Manual online
20.
Preset/Disc: These buttons have multiple functions,
which may vary according to the input device codes
programmed.
a. When the TUNER has been selected, these buttons
will scroll up
or down
through the stations
that have been programmed in the preset memory.
b. When CD is selected and the unit is a CD changer,
these buttons will change to the next disc
or
previous disc
.
c. When Tape 1 or Tape 2 is the input source, and the
tape machine is a compatible Harman Kardon dual
cassette deck, these buttons will switch between the
“A” and “B” sides.
21.
Channel/Skip: These buttons have multiple functions,
which vary according to the input device selected and the
codes programmed from another remote.
a. When TV, Vid 1 or Vid 2 are selected, they may
function as the channel up
or channel down
tuning buttons when programmed with the codes from
another unit’s remote.
b. When CD is selected these buttons act as forward and
reverse “Skip” buttons to move to the next track or
chapter on the disc.
c. When a compatible Harman Kardon cassette player
has been selected as Tape 1 or Tape 2, these
buttons move the tape forward
or backwards
to the next selection using the Music Scan feature.
22.
Memo: The memo button is used to enter stations to
the tuner’s preset memory in either the manual or automatic
modes. It is also used in the process of clearing the
memory. This button also performs the functions of the “ ”
memory. This button also performs the functions of the “ ”
symbol on compatible equipment.
23.
P-Scan: Press this button to automatically scan through
the stations preset into the tuner memory. Press the button
again to end the scan when the tuner stops at the desired
station. This button also performs the functions of the “ ”
station. This button also performs the functions of the “ ”
symbol on compatible equipment.
24.
Number Keys: These buttons serve as a ten button
numeric keypad to enter tuner preset positions. They are
also to be used to select channel numbers when TV has
been selected on the remote, or to select track numbers on
a CD, DVD or LD player, depending on how the remote has
been programmed. The letters below the buttons are used
to enter information for tuner station names.
NOTE: The 0 button has a dual function. It also serves
as the CLEAR button for use in programming the tuner
or clearing the system memory.
25.
Surround Mode Selection: Press one of these buttons
to select a surround mode for the current listening session.
26.
Sleep (AVR75): Press this button when the Sleep timer
has previously been activated to view the time remaining
before the unit turns off to the Standby Mode. To activate
the Sleep function, first put the unit in the Tuner Mode by
pressing the AM/FM button
pressing the AM/FM button
. Next, press the Sleep
button
and note that the Sleep and Memo indicators
will blink. Within that blinking time press the Memo
button
and then press the Sleep button again to set
the sleep time in the following order:
When the desired time is shown in the display, press the
Memo button
Memo button
to enter the time. The unit will go into
the Standby Mode when the time entered has elapsed.
26.
Sleep (AVR85): Pressing this button when the Sleep
timer has previously been activated allows you to view the
time remaining before the timer function turns the unit off.
When the remote is in the AM/FM mode
When the remote is in the AM/FM mode
, the Sleep
function may also be changed or set by pressing this button
so that the Sleep and Memo indicators
so that the Sleep and Memo indicators
blink (timer not
yet set) or Sleep time is indicated (timer set already). Within
that time press the Memo button
that time press the Memo button
so that both
indicators blink slowly. Now press the Sleep button
again to set the desired sleep time in the following order:
When the desired time is shown in the display, press the
Memo button
Memo button
to enter the time. The unit will go into
the Standby Mode when the time entered has elapsed.
27.
Learn LED: This indicator will illuminate when a button
on the remote is being programmed with signals from
another remote during the “learning” mode. The light will go
out when the signal is received and memorized.
28.
Sending LED: This indicator should flash any time a
button is pressed to confirm that a command is being sent to
the receiver or another unit. If the light is dim or does not
illuminate when a button is pressed the batteries in the
remote should be replaced.
1 1
Harman Kardon
Dolby Digital Audio/Video Receiver
AVR75/85
10
min
20
min
30
min
40
min
50
min
60
min
90
min
OFF
15
15
22
22
4 2
E
O
4
E O
22
15
10
min
20
min
30
min
60
min
90
min
OFF
22
15
26
26
Click on the first or last page to see other AVR 75 (serv.man2) service manuals if exist.