AVR 460 (serv.man2) - Harman Kardon Audio EMC - CB Certificate (repair manual). Page 64

 

 

- Page 9 of 10- 

 

 

 

 

 Report 

No. 

129952 

  

ATTACHMENT 3 

Clause 

Requirement + Test 

Result - Remark 

Verdict

TRF No. IEC60065_I 

15.1.1 
Cont. 

NO: Mains socket-outlets mounted on CLASS II 
apparatus shall comply with the specifications 
given in CEE Publ. 7 as fas as a Applicable, with 
the following amendments: 
§ 8 Dimensions 
a 2.5 A 250 V two-pole socket-outlets for electronic 
apparatus shall comply with the enclosed Standard 
Sheet I. 

 

§ 24 Mechanical strength 
A 2,5 A 250 V socket-outlets for CLASS II 
electronic apparatus are tested as specified in 
12.1.3 of EN 60065. Also the protecting rim shall 
be tested 
Justification: 

Act of 24 May 1929 relating to 

supervision of electrical installation (TEA 1929/FEL 
1998). 

Class II socket-outlet provided.

 

15.1.1 

UK: Apparatus which is fitted with a flexible cable 
or cord and is designed to be connected to a mains 
socket conforming to BS 1363 by means of that 
flexible cable or cord and plug shall be fitted with 
a ”standard plug” in accordance with Statutory 
Instrument 1768: 1994: The Plugs and Sockets etc. 
(Safety) Regulations 1994, unless exempted by 
those Regulations. 
NOTE ”Standard plug” is defined in SI 1768:1994 
and essentially means an approved plug 
conforming to BS 1363 or an approved conversion 
plug. 
Justification

: SI 1768: 1994 

Approved cord-set provided. 
See appended table, list of 
critical components.