AVR 35 (serv.man4) - Harman Kardon Audio User Guide / Operation Manual. Page 31

Operation

29

2. While the PTY is shown, press the 

button 

& u

to scroll through

the list of available PTY types, as shown
above. To simply search for the next station
transmitting any RDS data, use the 

button 

& u

until 

RDS

ONLY

appears in the display, just in front

of 

TRAFFIC

and 

NEWS

.

3. Press and hold the 

button 

* t

for one second until the tuner begins to
scan for the first station that has RDS data
matching the desired selection, and
acceptable signal strength for quality
reception.

4. The tuner will make up to one complete
scan of the entire FM band for the next
station, that matches the desired PTY type
and has acceptable reception quality. If no
such station is found, the tuner will return to
the last FM station in use before the search.

In normal operation, the audio or video
source selected for listening through the
AVR35RDS is sent to the record outputs. 
This means that any program you are
watching or listening to may be recorded
simply by placing machines connected 
to the outputs for 

b

or

¢

in the record mode.

When a tape recorder with separate record
and playback heads is used, you may
monitor the output of the recording by
selecting the 

9 l

.

Note that the previous source remains
selected as recording source and a red LED
will illuminate in the front panel above the

9

to remind you that

you are listening to the record playback
instead of the actual input source being
recorded.

NOTE: It is not possible to record the
output of Dolby Digital programs directly.
But their two channel information, the
„Downmix“ to Stereo or Dolby Surround
sound, can be recorded by connecting the
analog audio output of these sources to the
Record Inputs of the recorder directly.

Normal output level adjustment for the
AVR35RDS is established using the Test
Tone, as outlined on page 20. In some
cases, however, it may be desirable to
adjust the output levels using program
material such as a test disc, or a selection
you are familiar with. Additionally, the
output level for the subwoofer may only be
adjusted using this procedure.

To adjust the output levels using program
material, first set the reference volume for
the front left/right channels using the

Ù

. If you wish to

vary the difference between the left and
right channels, use the 

7

.

Once the reference level has been set, press
the 

button 

i ¯

and

note that 

FRONT L L E V

will appear

in the 

V

.

To change the level, first press the 

button 

˜

, and then use the

buttons 

¸

or the 

⁄

¤

buttons 

h

to

raise or lower the level. DO NOT use the
volume control, as this will alter the
reference setting.

Once the change has been made, press the

button 

˜

and then press the

buttons 

¸

or the 

⁄

¤

buttons

h

to select the next output channel

location that you wish to adjust. To adjust
the subwoofer level, press the 

buttons 

¸

or the 

⁄

¤

buttons 

h

until

S-WOOFER L E V

appears in the

V

.

Press the 

button 

˜

when the name of

the desired channel appears in the 

V

, and follow the

instructions shown above to adjust the
level.

Repeat the procedure as needed until all
channels requiring adjustment have been
set. When all adjustments have been made,
the AVR35RDS will return to normal
operation when no adjustments are made
for five seconds.