Read Harman Kardon AVR 35 (serv.man2) Service Manual online
Continuous Power Output
Tuning Cover Range 100kHz Step for AVR-35
(STEREO MODE), Input : CD
THD : 0.08%, 8 ohms
Both Channel Driven(20Hz-20kHz)
(SURROUND MODE)
THD : 0.5%, 8 ohms, 1kHz
THD : at 60W, 8 ohms, Input : CD
20Hz
1kHz
20kHz
IM Distortion at 45W, 8 ohms, Vol : Max.
Input Sensitivity for Rated Power Output(35W)
CD/DVD/TAPE MONITOR
VID1/VID2/VID3
S/N Ratio Input Shorted at 1 kHz 1W Output(WTD IHF-A)
CD
Tone Control
Bass : 100Hz
Treble : 10kHz
100Hz
1kHz
10kHz
Frequency Response at-3dB
Channel Crosstalk Input Shorted by 1 K Ohms
Mode : Stereo(1Watt)
Nominal
Limit
50W
40W
45W
RMS Output Power
THD(0.5%, 8 ohms, 1kHz)
All Channel Driven
S/N Ratio(Input Level : 200mV)
Input Shorted, IHF-A WTD
Frequency Respones at-3dB
8 ohms, Dolby Pro Logic
40W
65dB
100Hz-20kHz 150Hz-20kHz
35W
60dB
RMS Output Power
THD(0.5%, 8 ohms, 1kHz)
All Channel Driven
S/N Ratio(Input Shorted, IHF-A WTD)
Delay : 20ms, Input Level : 200mV
Frequency Response at-3dB
8 ohms, Dolby Pro Logic
40W
65dB
100Hz-7kHz 150Hz-7kHz
35W
60dB
ohm / 1dB
DC-6 MHz
VID1/VID2/VID3
Output Level / Impedance
VID1/VID2/VID3
Frequency Response at-3dB
1Vp-p/75
DC-8 MHz
1Vp-p/75 ohm / 1dB
Low pass crossover frequency
Slope (Low Pass Filter)
Surround mode : BYPASS(STEREO)
Input Signal : L ch (only) 200mV
Master Volume : 5dB
70Hz cut off
24dB/octave
35W
0.08%
0.08%
0.08%
0.03%
0.03%
0.03%
0.08%
170 230mV
170 230mV
0.03%
200mV
200mV
10dB 3dB
10dB 3dB
10dB 3dB
10dB 3dB
10Hz-80kHz
82dB
10dB
10dB
10dB
10dB
63dB
63dB
62dB
10Hz-70kHz
55dB
55dB
45dB
Nominal
Limit
Nominal
Limit
Line Level at Pre Out
Input Sensitivity / impedance
87.50 - 108.00 MHz
- 2 -
Click on the first or last page to see other AVR 35 (serv.man2) service manuals if exist.