Read Harman Kardon AVI 100 (serv.man10) User Guide / Operation Manual online
BASIC OPERATION
1 Press the POWER button to turn
the power ON, the display panel
will then light up.
• When using the POWER button
will then light up.
• When using the POWER button
on the remote control turn the unit
off, the unit will go into STANDBY
mode.
off, the unit will go into STANDBY
mode.
2 Select the desired program source
with the INPUT FUNCTION
SELECTOR buttons and the
selected input function appears in
the display.
SELECTOR buttons and the
selected input function appears in
the display.
3 Operate the selected component
for play back.
• When viewing and listening to
• When viewing and listening to
video sources, the picture of the
video source appears on the
television and the sound can be
heard from the speakers.
video source appears on the
television and the sound can be
heard from the speakers.
• When playing back a video
software using a surround sound
effect, refer to the “Surround
Sound Effects”.
effect, refer to the “Surround
Sound Effects”.
• When the TAPE MONITOR
button is set to ON so that the
TAPE MONITOR indicator lights
up, the selected program source
cannot be heard from the
speakers.
To listen to a program source
other than cassette deck be sure
to set the TAPE MONITOR button
to OFF.
TAPE MONITOR indicator lights
up, the selected program source
cannot be heard from the
speakers.
To listen to a program source
other than cassette deck be sure
to set the TAPE MONITOR button
to OFF.
4 Adjust the volume to a comfortable
listening level with the VOLUME
control or VOLUME UP/DOWN
buttons on the remote control.
control or VOLUME UP/DOWN
buttons on the remote control.
5 For private listening, insert a 1/4
inch plug of the headphone into the
HEADPHONE jack.
• When the headphones are
HEADPHONE jack.
• When the headphones are
plugged, sound from the
speakers is cut off.
speakers is cut off.
RECORDING WITH A
CASSETTE DECK
CASSETTE DECK
1 Select the program source to be
recorded with the INPUT
FUNCTION SELECTOR buttons.
FUNCTION SELECTOR buttons.
2 Start recording on the cassette
deck.
3 Play back the desired program
source.
• The volume, balance, bass and
• The volume, balance, bass and
treble settings have no effect on
the recording or dubbing.
the recording or dubbing.
• When recording is performed on
a 3-head cassette deck, the
recorded sound can be monitored
through the speakers by pressing
the TAPE MONITOR button to
ON.
recorded sound can be monitored
through the speakers by pressing
the TAPE MONITOR button to
ON.
DUBBING FROM VCR2 TO
VCR1
VCR1
1 Press the VCR2 button as a
program source to be recorded.
2 Start recording on the VCR
connected to VCR1.
3 Play back on the VCR connected
to VCR2, then the video and audio
signals from VCR2 will be dubbed
onto VCR1.
signals from VCR2 will be dubbed
onto VCR1.
RECORDING WITH SEPARATE
VIDEO AND AUDIO SOURCES
VIDEO AND AUDIO SOURCES
When dubbing from VCR2 to VCR1,
you can replace the audio signal from
VCR2 with the audio signal from other
program sources.
1 Press the VCR2 as a video source
you can replace the audio signal from
VCR2 with the audio signal from other
program sources.
1 Press the VCR2 as a video source
to be recorded.
2 Select the audio source to be
recorded with the INPUT
FUNCTION SELECTOR buttons.
FUNCTION SELECTOR buttons.
3 Start recording on the VCR
connected to VCR1.
4 Play back on the video and audio
components, allows you to watch
the picture from the video
component on the television and
listen to the sound from the audio
component through the speakers
while recording.
the picture from the video
component on the television and
listen to the sound from the audio
component through the speakers
while recording.
NOTE: Be sure to observe the order
of steps 1 and 2.
of steps 1 and 2.
11
Operation
ENGLISH
AVI100 engelsk 11/01/98 7:27 Side 11
Click on the first or last page to see other AVI 100 (serv.man10) service manuals if exist.