AVI 100 (serv.man10) - Harman Kardon Audio User Guide / Operation Manual. Page 8

This input is provided for connection
of an AM/FM Tuner.

This input is provided for any source
you want to hear. An additional
compact disc player, tape recorder,
TV video cassette recorder (VCR), 
etc. can be plugged into these jacks.

Connect the output cables of a
compact disc player to these jacks.

Connect the line output of your
CASSETTE DECK to these jacks.

Connect the line input of your
CASSETTE DECK to these jacks.

Connect these jacks to the
corresponding OUTPUT jacks of your
TV (if available) or VCR.

Connect these jacks to the
corresponding INPUT jacks of a VCR.
VIDEO OUTPUT jack: Connect this
jack to the VIDEO INPUT jack of the
VCR. VIDEO REC jack: Connect 
these jacks to the AUDIO INPUT
jacks of the VCR.

Connect this jack to the VIDEO
INPUT jack of a TV/MONITOR.

Connect this jack to the REMOTE IN
jack on a Harman Kardon component.
Use one of the accessory mini-plug
cables.
You can control many other Harman
Kardon components in your system
using the AVI100 remote commander.

Connect a Harman Kardon HE 1000
remote I.R. sensor to this jack. You
can operate the unit by remote
commander through the adaptor. It is
convenient when the unit is located in
a separate room.

Front Pre Out
When a separate power amplifier is
used to drive the front speakers,
connect the power amplifier input to
these jacks.
Front Main In
When a separate pre-amplifier is
connected and this unit is used as a
power amplifier, connect the pre-
amplifier output to these jacks.

NOTE: When you do not use the PRE
OUT and MAIN IN separately, always
connect the PRE OUT and MAIN IN
jacks with a jumper plug.

Connect a powered subwoofer to
these jacks. This output may also be
used for any external component
requiring a full bandwidth line-level
input.

Connect the front left (L) and right (R)
speakers to the corresponding
terminals. Make sure that the positive
(+) and negative (-) terminals on the
speaker are connected to the
corresponding terminals on the
amplifier.

Connect center and rear speakers to
the corresponding terminals. When
you connect the rear speakers,
connect both L and R speakers.
PLEASE NOTE: Sound will not be
provided through the rear speakers
unless both speakers are connected.

Plug this cord in AC outlet on a wall.

These outlets provide AC power. The
AC power is switched by the power
button. Use this outlet for a CD player
or a cassette deck.

6

ENGLISH

AVI100 engelsk  11/01/98 7:27  Side 6