Read Sony KV-32HS510 Service Manual online
— 15 —
KV-32HS510/34DRC510/34HS510/36HS510/38DRC510
2-3.4. SCREEN-CORNER CONVERGENCE
Preparation:
• Input a cross hatch pattern signal.
1. Affix a permalloy assembly corresponding to the misconverged areas.
�
�
�
�
������������������
��������������
�
�
�
�
2-3.5. DYNAMIC CONVERGENCE
ADJUSTMENTS
• Set dynamic convergence using the following service mode adjustment
data.
• Only H-component can be corrected, for vertical component use
permalloy to compensate.
• After adjusting the following parameter, write data into NVM
MUTING + ENTER then copy for 1080i CPY2
(D Conv Item 13 - Change data to 1 then write.)
0. YBWU (Upper Y-BOW)
B R
B R
1. YBWL (Lower Y BOW)
B R
B R
2. RSAP (Right H AMP)
R B
3. RUBW (Right Upper BOW)
B R
4. RUMB (Right Upper Middle BOW)
B R
5. RLBW (Right Lower BOW)
R B
6. RLMB (Right Lower Middle BOW)
B R
7. LSAP (Left H AMP)
B R
8. LUBW (Left Upper BOW)
B R
9. LUMB (Left Upper Middle BOW)
B R
10. LLBW (Left Lower BOW)
B R
Click on the first or last page to see other KV-32HS510 service manuals if exist.