Read Sony DCR-TRV250 (serv.man4) Service Manual online
DCR-TRV250
6-5
[Jig Modification]
Connect the LANC SIG pin of the I/F unit for LANC control to the land of pin 1 of the CPC jig connector with a jumper wire.
This modification is required in the DCR-TRV250 only. Be sure to disconnect the jumper wire when using the I/F unit for LANC control
or CPC jig connector on other models.
This modification is required in the DCR-TRV250 only. Be sure to disconnect the jumper wire when using the I/F unit for LANC control
or CPC jig connector on other models.
1
CPC jig connector
(J-6082-539-A)
LANC jack
LANC
jack
jack
The other side
CX2000
CN1
I/F unit for LANC control
(J-6082-521-A)
(J-6082-521-A)
Fig. 6-1-2
Click on the first or last page to see other DCR-TRV250 (serv.man4) service manuals if exist.