Read Sony DSC-W520 Service Manual online
DSC-W520
3-13
2ND FOCUS GEAR
ZOOM LONG GEAR
REAR RETAINER
(*) ECCENTRIC BUSH
Aligning is possible by turning it if the
result of [Focus check] is NG level in the
"4. Checking and judging" page 3-15.
result of [Focus check] is NG level in the
"4. Checking and judging" page 3-15.
16. Install the 2ND FOCUS GEAR and the ZOOM LONG GEAR.
17. Install the REAR RETAINER.
(*) Confirm whether the ECCENTRIC BUSH is there or not.
18. Install the four screws.
To retract, apply a positive
supply voltage (+) here.
supply voltage (+) here.
To Tele, apply a positive
supply voltage (+) here.
supply voltage (+) here.
19. Install the two screws.
20. Solder the connection.
21. To test the assembly, apply a voltage of 2.5 V for DC to the zoom motor.
Click on the first or last page to see other DSC-W520 service manuals if exist.