Read Sony DSC-W520 Service Manual online
DSC-W520
3-8
3-4. Assembly
This cut portion should be located
around only this phase.
around only this phase.
Front view of the
front barrel part
front barrel part
Lever
5. After the BARRIER ASSY has been replaced with a new one, return the process from 4. to 1. according to the
process flow.
Note-1: Align the lever with the dedicated cut portion as shown in the figure.
Note-2: Attach the COSMETIC RING ASSY with small amounts of strong adhesive (*).
(*) Commercially available. Do not use any instant glue.
Assembly-2:
Routing Method of
the Speaker Lead Wire
the Speaker Lead Wire
Speaker lead wire
Assembly-1:
Putting position of the Retainer
Boss
LCD Bracket
Retainer
3-1. Cut the Microphone lead wire as shown below.
3-2. Strip off the coating of the Microphone lead wire as shown below.
3-3. Perform the preliminary solder dipping on the core of
the Microphone lead wire as shown below.
Cut
12mm (±3mm)
Microphone lead wire
Preliminary solder dipping
Strip off
1.5mm (±0.5mm)
Assembly-3:
Assembling Method of the Microphone
Click on the first or last page to see other DSC-W520 service manuals if exist.