Read Sony CDX-GT420U / CDX-GT424U / CDX-GT427UE / CDX-GT470U / CDX-GT470US Service Manual online
CDX-GT420U/GT424U/GT427UE/GT470U/GT470US
5
SECTION 1
SERVICE NOTE
EXTENSION CABLE AND SERVICE POSITION
When repairing or servicing this set, connect the jig (extension
cable) as shown below.
When repairing or servicing this set, connect the jig (extension
cable) as shown below.
• Connect the MAIN board (CN350) and the SERVO board
(CN401) with the extension cable (Part No. J-2502-076-1).
NOTE FOR REPLACEMENT OF THE SERVO BOARD
When repairing, the complete SERVO board (A-1362-921-A)
should be replaced since any parts in the SERVO board cannot be
repaired.
When repairing, the complete SERVO board (A-1362-921-A)
should be replaced since any parts in the SERVO board cannot be
repaired.
NOTE FOR REPLACEMENT OF THE USB CONNECTOR
(J11)
To replace the USB connector requires alignment.
1. Insert the USB connector into the front panel.
2. Place the KEY board on the front panel and align the terminals
(J11)
To replace the USB connector requires alignment.
1. Insert the USB connector into the front panel.
2. Place the KEY board on the front panel and align the terminals
of the USB connector with the holes in the KEY board.
3. Solder the four terminals of the connector.
SERVO BOARD
CN401
CN401
MAIN BOARD
CN350
CN350
J-2502-076-1
KEY board
front panel
USB (socket) connector
Click on the first or last page to see other CDX-GT420U / CDX-GT424U / CDX-GT427UE / CDX-GT470U / CDX-GT470US service manuals if exist.