Read Sony NWZ-E473 / NWZ-E473K / NWZ-E474 / NWZ-E474K / NWZ-E475 Service Manual online
NWZ-E473/E473K/E474/E474K/E475
10
2-5. OPEN THE SHORT-LAND
Note 1: This illustration sees the mechanical commonness block from LCD assy side.
Note 2: Make sure to remove one solder to become an open state before disassembling the mechanical common block.
Note 3: Solder the short-land after all wirings are connected when you exchanged some mounted board.
Note 2: Make sure to remove one solder to become an open state before disassembling the mechanical common block.
Note 3: Solder the short-land after all wirings are connected when you exchanged some mounted board.
2-4. CABINET FRONT BLOCK
2
screw (M1.4)
2
screw (M1.4)
1
screw
(P1.4
u 2.5)
1
screw
(P1.4
u 2.5)
3
claw
6
cabinet front block
5
four claws
OK
– Rear bottom side view –
4
Remove the common block
in the direction of an arrow.
common block
Note: When installing the cabinet front block, check that
this portion has not broken and having fitted in.
NG
1 Remove the solder of short-land.
– Front side view –
Click on the first or last page to see other NWZ-E473 / NWZ-E473K / NWZ-E474 / NWZ-E474K / NWZ-E475 service manuals if exist.