Read Sony NWZ-E473 / NWZ-E473K / NWZ-E474 / NWZ-E474K / NWZ-E475 Service Manual online
NWZ-E473/E473K/E474/E474K/E475
9
2-3. PANEL (REAR) BLOCK
JIG
When disassembling the set, use the following jig.
Part No.
Description
9-913-402-33 Tool for Disassembly
1
two screws (M1.4)
2
two screws (M1.4)
panel (rear) block
panel (rear) block
cabinet front block
cabinet front block
Right side:
5
six claws
7
panel (rear) block
6
Remove the cabinet front block
in the direction of an arrow.
cabinet front block
3
Insert the jig in the gap between cabinet
front block and panel (rear) block.
Then slide it to arrow direction to remove
claws of panel (rear) block.
4
Insert the jig in the gap between cabinet
front block and panel (rear) block.
Then slide it to arrow direction to remove
claws of panel (rear) block.
Left side:
support (hold)
switch
Note: When installing panel (rear) assy
block, the position of switch and
support (hold) is set and installed.
– Rear bottom side view –
– Front bottom side view –
Click on the first or last page to see other NWZ-E473 / NWZ-E473K / NWZ-E474 / NWZ-E474K / NWZ-E475 service manuals if exist.